Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Carbenicillin disodium salt
- Product Code
- A1491
Regulatory Identifiers
- CAS Number
- 4800-94-6 Check regulations →
- EC Number
- 225-360-8 Check regulations →
Identified Uses
For lab use only. Not for drug, household or other uses. Laboratory chemicals
Manufacturers & Suppliers
AppliChem GmbH
manufacturer
Ottoweg 4 D-64291 Darmstadt
+49 (0)6151 93570
Emergency Contacts
Emergency Contact
+49(0)6151 93570
Inside normal buisness hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Carbenicillin disodium salt EC: 225-360-8 | 4800-94-6 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.
Call a doctor immediately. Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Call a doctor immediately.
Immediate Medical Attention
Involve doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
In case of fire, the following can be released: Nitrogen oxides (NOx), Carbon monoxide and carbon dioxide, Sulphur oxides (SOx), Metal oxides. Non-combustible.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid substance contact.
Do not allow to enter sewers/ surface or ground water.
Clean up affected area.
Related Products
Similar products with comparable safety profiles
Carbenicillin, Disodium Salt
---
Ampicillin sodium salt
CAS: 69-52-3
Ampicillin sodium salt
CAS: 69-52-3
Penicillin G potassium salt
CAS: 113-98-4
Ampicillin (sodium salt)
CAS: 69-52-3
Penicillin G sodium
CAS: 000069-57-8
AMPICILLIN SODIUM SALT STERILE
---
Nigericin . sodium salt
CAS: 28643-80-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of dust. Any unavoidable deposit of dust must be regularly removed.
This product is hygroscopic. Store under lock and key and with access restricted to technical experts or their assistants only. Keep container sealed.
The product is not flammable.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0.11 mm. Value for the permeation: Level ≥ 480 min. As protection from splashes gloves made of the following materials are suitable: Nitrile rubber, NBR, Recommended thickness of the material: ≥ 0.11 mm, Value for the permeation: Level ≥ 480 min.
Safety glasses
Filter ABEK-P2. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the hazardous substances handled.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
oxidizing agent
In the event of fire: See chapter 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No further relevant information available regarding aquatic toxicity.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
No further relevant information available.
12.5 Results of PBT and vPvB assessment
The substance is assessed as not PBT or vPvB.
12.6 Endocrine disrupting properties
The product does not contain substances with endocrine disrupting properties.
12.7 Other adverse effects
The product is classified as slightly hazardous for water (Water hazard class 1) and must not be allowed to reach ground water, water courses, or sewage systems.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemicals must be disposed of in compliance with the respective national regulations.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Carbenicillin disodium salt?
The signal word is danger.
What is the physical form of Carbenicillin disodium salt?
Carbenicillin disodium salt is a solid with white to light yellow color. It has characteristic odor.
What is Carbenicillin disodium salt used for?
For lab use only. Not for drug, household or other uses. Laboratory chemicals
What are the hazard statements for Carbenicillin disodium salt?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
What is the melting point of Carbenicillin disodium salt?
The melting point is Undetermined. and the boiling point is Undetermined..