Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Phenylmethylsulfonyl Fluoride
- Product Code
- 36978B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Use as laboratory reagent, Scientific research and development
Uses advised against
Not for consumer use.
Manufacturers & Suppliers
LIFE TECHNOLOGIES EUROPE BV
manufacturer
KWARTSWEG 2, 2665 NN BLEISWIJK, NETHERLANDS
31-(0)180 392 400
Pierce Biotechnology
manufacturer
P.O. Box 117, Rockford, IL 61105, United States
1.815.968.0747
Life Technologies Limited
manufacturer
3 Fountain Drive, Inchinnan Business Park, Paisley, PA4 9RF, UK
+44 (0)141 814 6100
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
CHEMTREC
1-703-741-5970
CHEMTREC Ireland
+(353)-19014670
EN, GA
CHEMTREC UK
+(44)-870-8200418
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzenemethanesulfonyl fluoride | 329-98-6 | 98 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. If symptoms persist, call a doctor.
Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice. Get medical attention if symptoms occur.
Immediate Medical Attention
Immediate medical attention is required for skin and eye contact. If skin irritation occurs: Get medical advice/ attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Wasr spray. Carbon dioxide (CO₂). Foam. Dry chemical.
No information available.
Not known.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Avoid contact with skin, eyes or clothing. Use personal protection equipment.
No special environmental precautions required.
Take up mechanically, placing in appropriate containers for disposal.
Materials: appropriate containers
Related Products
Similar products with comparable safety profiles
Phenylmethylsulfonyl Fluoride
---
Phenylmethylsulfonyl fluoride
CAS: 329-98-6
Phenylmethyl sulphonyl fluoride
CAS: 329-98-6
Phenylmethanesulfonyl fluoride solution
---
alpha-Toluenesulfonyl fluoride
CAS: 329-98-6
Perfluorobutylsulphonamide
CAS: 30334-69-1*
Bis(phenylsulfonyl)methane
CAS: 3406-02-8
Sodium fluoride
CAS: 7681-49-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wear recommended Personal Protective Equipment. See Section 8 for more detail. Do not get in eyes, on skin, or on clothing. Do not ingest. If during normal use the material presents a respiratory hazard, use adequate ventilation and/or wear appropriate respirator.
Keep in a dry, cool and well-ventilated place. Keep in properly labelled containers. Store in accordance with local regulations.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known.
Hazardous reaction has not been reported.
No information available.
No dangerous reaction known under conditions of normal use.
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
The environmental impact of this product has not been fully investigated. No data available for toxicity to algae, daphnia, fish, or Microtox.
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The generation of waste should be avoided or minimized wherever possible. This material and its container must be disposed of in according to approved disposal technique.
Disposal of this product, its solutions or of any by-products, shall comply with the requirements of all applicable local, regional or national/federal regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2928
- Shipping Name
- Toxic solid, corrosive, organic, n.o.s. (a-toluenesulphonyl fluoride)
- Transport Class
- 6.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Phenylmethylsulfonyl Fluoride?
The signal word is danger.
What is the physical form of Phenylmethylsulfonyl Fluoride?
Phenylmethylsulfonyl Fluoride is a powder appearing as powder with white color. It has mixture has not been tested odor.
What is the solubility of Phenylmethylsulfonyl Fluoride?
Mixture has not been tested
What is Phenylmethylsulfonyl Fluoride used for?
Use as laboratory reagent, Scientific research and development
What are the hazard statements for Phenylmethylsulfonyl Fluoride?
This substance has 2 hazard statements:
- H301: Toxic if swallowed
- H314: Causes severe skin burns and eye damage
What is the melting point of Phenylmethylsulfonyl Fluoride?
The melting point is No data and the boiling point is No data.