Hydrochloric acid 1 mol/l - 1 N volumetric standard solution

Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse skin with water/shower. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse cautiously with water for several minutes. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse mouth. Call a doctor if you feel unwell.

water spray, alcohol resistant foam, dry extinguishing powder, BC-powder, carbon dioxide (CO₂)

water jet

Non-combustible.

Fight fire with normal precautions from a reasonable distance.

Avoid contact with skin, eyes and clothes. Do not breathe vapour/spray.

Keep away from drains, surface and ground water.

Absorb with liquid-binding material.

Materials: sand, diatomaceous earth, acid- or universal binding agents

No special measures are necessary.

Keep container tightly closed.

Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs.

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22°C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. NBR (Nitrile rubber), >0,11 mm, >480 minutes (permeation: level 6)

Use safety goggle with side protection.

Respiratory protection necessary at: Aerosol or mist formation. Type: E (against acidic gases like sulphur dioxide or hydrogen chloride, colour code: Yellow).

Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.

Keep away from drains, surface and ground water.

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Substance or mixture corrosive to metals.

Violent reaction with: Strong alkali

There are no specific conditions known which have to be avoided.

different metals

Hazardous combustion products: see section 5.

Dispose of contents/container in accordance with local/regional/national/international regulations.

This material and its container must be disposed of as hazardous waste.

Provisions for dangerous goods (ADR) should be complied within the premises.