NextSDS Logo
Safety Data Sheet EN

CONTACT CEMENT

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CONTACT CEMENT
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Contact adhesive

Uses advised against

Not to be used for any purpose other than the one the product was designed for

Manufacturers & Suppliers

Select Style 'Cosplay Shop' logo

Select Style 'Cosplay Shop'

national supplier

Dreef ter panne 1a, P.O. Box 8000, BRUGGE - BELGIË

+32 50 34 20 88

http://www.cosplayshop.be

Emergency Contacts

Anti-gifcentrum België/Centre Anti-Poison Belgique

+32 (0)70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336
STOT RE Cat. 2 H373
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H225 Highly flammable liquid and vapour.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H373 May cause damage to organs through prolonged or repeated exposure (if inhaled).
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from sources of ignition - No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof equipment.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash hands, forearms and face thoroughly after handling.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
ethyl acetate EC: 205-500-4 141-78-6 20 - 30% Yes
Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane EC: 927-510-4 --- 7.5 - 25% Yes
methyl ethyl ketone EC: 201-159-0 78-93-3 15 - 20% Yes
acetone; propan-2-one; propanone EC: 200-662-2 67-64-1 10 - 15% Yes
Hydrocarbons, C6 isoalkanes, <5% n-hexane EC: 931-254-9 --- 3.75 - 12.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air. If not breathing, give artificial respiration. When there is no quick recovery : consult a doctor/medical service.

Symptoms: Dizziness. Nausea. Headache. Unconsciousness.

Skin contact

Rinse with water. Wash with water and soap. Take victim to a doctor if irritation persists.

Symptoms: Repeated or prolonged skin contact may cause dermatitis and defatting.

Eye contact

Rinse immediately with plenty of water. Take victim to an ophthalmologist if irritation persists.

Symptoms: Irritating to eyes. Pain. Redness of the eye tissue.

Ingestion

In all cases of doubt, or when symptoms persist, seek medical attention. Do not induce vomiting.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry powder. Carbon dioxide. Water haze. Carbon dioxide. Powder. Foam. Sand. sand/earth.

Unsuitable media

Do not use a high volume water jet.

Specific hazards

May form flammable en explosive vapour-air mixture. Possible ignition from a distance. Will float and can be reignited on water surface. Explosion hazard: Atex klasse IIA, T3.

Instructions

Eliminate all ignition sources if safe to do so. Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure adequate air ventilation. When handling product, avoid contact with skin and eyes. No naked flames or sparks. In order to rule out potential electrostatic discharge production, the system must be adequately grounded. Do not inhale vapour. Stop engines and no smoking. Shut off leaks if without risks. Evacuate unnecessary personnel. Ventilate area. Stop leak if safe to do so. Stop release.

Small spill

take up in non-combustible absorbent material and shovel into container for disposal.

Environmental

Substance must not be discharged into the sewer.

Cleanup methods

Wash down leftovers with plenty of water.

—

Related Products

Similar products with comparable safety profiles

C

Cement

---

2

250003 Cement Off

UFI: HVJW-91KU-T20C-J6Y3

R

Rubber Cement

---

N

Nonflammable Contact Cement

---

L

Liquid Cement Crack Filler

---

T

TIP TOP CEMENT SC 2000

---

O

Original Contact Cement Bottle

---

Q

Quick Plug Hydraulic Cement

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only outdoors or in a well-ventilated area. Obtain special instructions before use. Do not get in eyes, on skin, or on clothing. Vapours are heavier than air and may travel considerable distance to an ignition source and flash back to source of vapours. No naked flames, sparks, and do not smoke. Do not handle until all safety precautions have been read and understood. Keep away from ignition sources (including static discharges). Provide good ventilation in process area to prevent formation of vapour. Take precautionary measures against static discharge.

Storage

Store in original container. Keep container tightly closed. Keep in a cool, well-ventilated place.

Hygiene

Do not eat, drink or smoke when using this product.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep away from ignition sources (including static discharges). Take precautionary measures against static discharge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation. Wear suitable respiratory equipment in case of insufficient ventilation.

Hands

Chemical resistant gloves (according to European standard EN 374 or equivalent)

Eyes

Safety glasses

Respiratory

Ensure adequate ventilation. If local exhaustion is insufficient, wear full-face mask.

Skin/Body

Standard working clothes. Materials for protective clothing: synthetic material. latex. polyethylene/ethylenevinylalcohol. PVC. synthetic rubber

Environmental

See section 6,7, 12 en 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Yellow.
Colour Intensity
---
Form
---
Odor
characteristic odour. Aromatic odour. ethylacetate.
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
76 - 85 °C
Flash Point
< 0 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
10.33 kPa
Vapor Density
---
Relative Density
≈ 0.88
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
11.5 vol %
Lower Explosive Limit
1.2 vol %
Explosive Limits
---
Auto Ignition Temperature
> 200 °C
Decomposition Temperature
---
Solubility
Water: insoluble in water
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
72 - 75
Metal Corrosion
---
Dynamic Viscosity
3200 - 3800 mPa·s Spindle 4, 20 RPM @ 20°C
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Vapours may form flammable and explosive mixture with air.

Reactivity

No data available.

Hazardous reactions

No additional information available

Avoid

fire, naked flames. sparks. Heat. direct sunlight.

Incompatible

Water. Certain plastic materials.

Decomposition

Hazardous smoke may be released during heating until decomposition.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Ecology - general : Floats on water, evaporates quickly, danger of pollution of drinking water when large quantities of the product enters the soil. . Avoid undiluted product to come into sewer or superficial water. Ecology - water : Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment Acute aquatic toxicity : Not classified Chronic aquatic toxicity : Toxic to aquatic life with long lasting effects.

12.1. Toxicity

LC50 fish 2 > 230 mg/l 96 u Pimephales Promelas; EC50 Daphnia 2 > 164 mg/l Magna 24u

12.1. Toxicity

methyl ethyl ketone (78-93-3) LC50 fish 1: 1690 mg/l (96 h, LEPOMIS MACROCHIRUS, FRESH WATER) LC50 fish 2: 3200 mg/l (96 h, PIMEPHALES PROMELAS) LC50 other aquatic organisms 1: 8890 mg/l (DAPHNIA MAGNA) LC50 other aquatic organisms 2: 1950 ppm (24 h, ARTEMIA SALINA) EC50 Daphnia 1: 308 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna; Static system; Fresh water; Experimental value) EC50 Daphnia 2: 5091 mg/l (48 h, DAPHNIA MAGNA) EC50 other aquatic organisms 1: 120 mg/l (72 h, ALGAE) EC50 other aquatic organisms 2: 0.333 mg/l (<1 h, PHOTOBACTERIUM PHOSPHOREUM, MICROTOXTEST) TLM fish 1: 5600 mg/l (96 h, GAMBUSIA AFFINIS) TLM fish 2: 1690 mg/l (96 h, LEPOMIS MACROCHIRUS, FRESH WATER) TLM other aquatic organisms 2: > 1000 ppm (96 h) Threshold limit other aquatic organisms 1: 3200 mg/l (96 h, GAMBUSIA AFFINIS) Threshold limit other aquatic organisms 2: 1150 mg/l (16 h, PSEUDOMONAS PUTIDA) Threshold limit algae 1: 110 mg/l (168 h, MICROCYSTIS AERUGINOSA) Threshold limit algae 2: 4300 mg/l (192 h, SCENEDESMUS QUADRICAUDA)

12.1. Toxicity

LC50 fish 1 > 5000 mg/l 96u; EC50 Daphnia 1 > 10000 mg/l 48u

12.2. Persistence and degradability

12.2. Persistence and degradability

ethyl acetate (141-78-6) Persistence and degradability Readily biodegradable.

Readily biodegradable.

12.2. Persistence and degradability

Persistence and degradability: Readily biodegradable. Biochemical oxygen demand (BOD): 2.03 g O₂/g substance. Chemical oxygen demand (COD): 2.31 g O₂/g substance. ThOD: 2.44 g O₂/g substance. BOD (% of ThOD): > 0.5 (5 days; Literature study)

The substance is readily biodegradable.

12.2. Persistence and degradability

acetone; propan-2-one; propanone (67-64-1) Persistence and degradability: Readily biodegradable.

Readily biodegradable.

12.3. Bioaccumulative potential

12.3. Bioaccumulative potential

| ethyl acetate (141-78-6) | | | Log Pow | 0.68 | | Bioaccumulative potential | Not established. |

12.3. Bioaccumulative potential

methyl ethyl ketone (78-93-3) Log Pow 0.26/0.69 Bioaccumulative potential There is no bioaccumulation.

12.3. Bioaccumulative potential

Log Pow: -0.24 Bioaccumulative potential: There is no bioaccumulation.

12.4. Mobility in soil

ethyl acetate (141-78-6) Ecology - soil: Moderately soluble in water. methyl ethyl ketone (78-93-3) Surface tension: 0.024 N/m (20°C) Log Koc: Koc,34; Calculated value

12.5. Results of PBT and vPvB assessment

Component ethyl acetate (141-78-6) This substance/mixture does not meet the PBT criteria of REACH regulation, annex XIII methyl ethyl ketone (78-93-3) This substance/mixture does not meet the PBT criteria of REACH regulation, annex XIII This substance/mixture does not meet the vPvB criteria of REACH regulation, annex XIII acetone; propan-2-one; propanone (67-64-1) This substance/mixture does not meet the PBT criteria of REACH regulation, annex XIII This substance/mixture does not meet the vPvB criteria of REACH regulation, annex XIII

The substances ethyl acetate, methyl ethyl ketone, and acetone do not meet the PBT or vPvB criteria of REACH regulation, annex XIII.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1133
Shipping Name
ADHESIVES, containing a flammable liquid
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Contains no substance on the REACH candidate list. Contains no REACH Annex XIV substances. Contains no substance subject to REGULATION (EU) No 649/2012. Substance(s) are not subject to Regulation (EC) No 850/2004.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CONTACT CEMENT?

The signal word is danger.

What is the physical form of CONTACT CEMENT?

CONTACT CEMENT is a liquid with yellow. color. It has characteristic odour. aromatic odour. ethylacetate. odor.

What is the solubility of CONTACT CEMENT?

Water: insoluble in water

What is CONTACT CEMENT used for?

Contact adhesive

What are the hazard statements for CONTACT CEMENT?

This substance has 6 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • H373: May cause damage to organs through prolonged or repeated exposure (if inhaled).
  • H411: Toxic to aquatic life with long lasting effects.