TIP TOP CEMENT SC 2000

Move to fresh air in case of accidental inhalation of vapours. In the event of symptoms refer for medical treatment.

Symptoms: May cause drowsiness or dizziness.

Wash off immediately with soap and plenty of water. Consult a doctor if skin irritation persists.

Symptoms: May cause an allergic skin reaction. Causes skin irritation.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical treatment by eye specialist.

Symptoms: Causes serious eye irritation.

Induce vomiting only upon the advice of a physician. Attention. Beware, danger of aspiration. Summon a doctor immediately. Immediately give plenty of water, if possible charcoal slurry.

Foam, carbon dioxide (CO2), dry chemical, water-spray. Product does not burn, fire-extinguishing activities according to surrounding.

Full water jet.

Keep away from heat and sources of ignition. Cool containers at risk with water spray jet.

In case of vapour formation use respirator. Ensure adequate ventilation. Use personal protective clothing.

Do not discharge into the drains/surface waters/ground water. Do not discharge into the subsoil/soil.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder). Shovel into suitable container for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder)

Keep container tightly closed. Vapours are heavier than air and spread along ground. Care for thoroughly room ventilation, if necessary suck off at workplace. Avoid contact with skin, eyes and clothing.

Keep containers tightly closed in a cool, well-ventilated place. Keep away from food, drink and animal feeding stuffs.

Avoid contact with skin, eyes and clothing. Keep away from food, drink and animal feeding stuffs.

Keep away from heat and sources of ignition.

Ensure adequate ventilation, especially in confined areas. Do not inhale vapours.

Protective gloves resistant to chemicals made off viton, minimum coat thickness 0,7 mm, permeation resistance (wear duration) approx. 480 minutes, i.e. protective glove <Vitoject 890> made by www.kcl.de. This recommendation refers exclusively to the chemical compatibility and the lab test conforming to EN 374 carried out under lab conditions. Requirements can vary as a function of the use. Therefore it is necessary to adhere additionally to the recommendations given by the manufacturer of protective gloves.

Tightly fitting goggles (EN 166). Eye wash bottle with pure water (EN 15154).

In case of insufficient ventilation wear suitable respiratory equipment (gas filter type A) (EN 14387).

Long sleeved clothing (EN 368).

Stable under normal conditions.

No decomposition if stored and applied as directed.

Reactions with alkali metals. Reactions with earth alkali metals. Reactions with oxidizing agents.

Above 120°C, a thermic decomposition may take place.

Alkaline metals and alkaline earth metals., Bases., oxidizing agents, Aluminium powder

Chlorine and traces of phosgene. Hydrogen chloride gas Carbon monoxide and carbon dioxide.

Where possible recycling is preferred to disposal.

Can be incinerated, when in compliance with local regulations.