NextSDS Logo
Safety Data Sheet EN

FOAMGLAS® insulation, FOAMGLAS® ONE™ insulation, FOAMGLAS® HLB insulation

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FOAMGLAS® insulation, FOAMGLAS® ONE™ insulation, FOAMGLAS® HLB insulation
Chemical Name
Cellular glass insulation

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Insulation of tanks, spheres, piping, roofs and equipment. For professional use only.

Manufacturers & Suppliers

P

Pittsburgh Coming Corporation

manufacturer

Global Industry Headquarters, 800 Presque Isle Drive, Pittsburgh, PA 15239

+1 724 327 6100

Emergency Contacts

CHEMTREC

+1 800 424 9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Dust in contact with skin will cause irritation.
H319 Direct contact of dust with eyes will cause eye irritation.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
Glass Dust --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move the exposed person to fresh air at once, apply artificial respiration if needed. Call poison center, physician or emergency medical service if needed. Encourage victim to cough, spit out, and blow nose to remove dust. If breathing is difficult, GET MEDICAL ATTENTION.

Skin contact

Wash thoroughly without pressure. If irritation persists or skin is broken, consult physician.

Eye contact

Flush with potable water for 15 minutes, do not rub or apply pressure. Consult physician or emergency medical service.

Ingestion

Wash out mouth with water provided person is conscious. Never give anything by mouth to an unconscious person. Call a physician immediately

Symptoms: An unlikely route of entry.

Immediate Medical Attention

Call a physician immediately

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Fine Water Spray, CO₂, Dry Chemical, Foam.

Specific hazards

None. This product is not flammable or combustible. Packaging is combustible.

Instructions

If entering a confined area, use self-contained breathing apparatus.

Firefighter Protection

Wear self-contained breathing apparatus and protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not get in eyes, on skin, or on clothing. Do not breathe dust. Avoid generating dust. Wear personal protective equipment. Refer to recommendations in section 8. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling and before eating or drinking.

Environmental

All in accordance with local, state and federal government regulations.

Cleanup methods

Collect in sift proof containers.

Materials: sift proof containers

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid generation of dust. Wash hands before eating, drinking, smoking or using toilet. Keep out of reach of children.

Storage

If storing for long periods, protect product from weather.

Hygiene

Wash hands before eating, drinking, smoking or using toilet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Black cellular solid
Colour
---
Colour Intensity
---
Form
---
Odor
no odor unless cut or crushed, rotten egg odor when cells are crushed or cut
Odor Threshold
0.002 ppm
Ph
---
Melting Point
732 (1350) °C (°F)
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
0.11 – 0.22
Bulk Density
---
Density
---
Flammability
Non-Flammable
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
0.0 (0.0) g/l (lbs./gal)
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

Hazardous reactions will not occur under normal conditions.

Hazardous reactions

Hazardous reaction will not occur

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

AQUATIC TOXICITY: NA

12.2 Persistence and degradability

BIODEGRADATION: NA

12.3 Bioaccumulative potential

BIOACCUMULATION: NA

12.4 Mobility in soil

Not provided

12.5 Results of PBT and vPvB assessment

Not provided

12.6 Endocrine disrupting properties

Not provided

12.7 Other adverse effects

Not provided
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose of waste material in accordance with all local, regional, national, provincial, territorial and international regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Regulatory information includes compliance with OSHA 29 CFR 1910-1200, TSCA, SARA, CERCLA, and WHMIS. No components are listed under SARA 302, 304, 311/312, 313, or CERCLA. No California Proposition 65 warnings apply.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FOAMGLAS® insulation, FOAMGLAS® ONE™ insulation, FOAMGLAS® HLB insulation?

The signal word is warning.

What is the physical form of FOAMGLAS® insulation, FOAMGLAS® ONE™ insulation, FOAMGLAS® HLB insulation?

FOAMGLAS® insulation, FOAMGLAS® ONE™ insulation, FOAMGLAS® HLB insulation is a solid appearing as black cellular solid . It has no odor unless cut or crushed, rotten egg odor when cells are crushed or cut odor.

What is FOAMGLAS® insulation, FOAMGLAS® ONE™ insulation, FOAMGLAS® HLB insulation used for?

Insulation of tanks, spheres, piping, roofs and equipment. For professional use only.

What are the hazard statements for FOAMGLAS® insulation, FOAMGLAS® ONE™ insulation, FOAMGLAS® HLB insulation?

This substance has 2 hazard statements:

  • H315: Dust in contact with skin will cause irritation.
  • H319: Direct contact of dust with eyes will cause eye irritation.

What is the melting point of FOAMGLAS® insulation, FOAMGLAS® ONE™ insulation, FOAMGLAS® HLB insulation?

The melting point is 732 (1350) °C (°F) .