NextSDS Logo
Safety Data Sheet EN

LOCTITE SI 5331 WH TB100ML FR/N

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE SI 5331 WH TB100ML FR/N

Regulatory Identifiers

CAS Number
N/A
UFI Code
V2RP-VX1J-020W-A2PG

Identified Uses

Silicone sealant

Manufacturers & Suppliers

Henkel AG & Co. KGaA logo

Henkel AG & Co. KGaA

manufacturer

Henkelstr. 67, 40589 Düsseldorf, Germany

+49 211 797 0

http://www.mysds.henkel.com

Emergency Contacts

Henkel information service

+49-(0)211-797-3350

around-the-clock

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
STOT RE H373

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P201 Obtain special instructions before use.
P273 Avoid release to the environment.
P280 Wear eye protection/face protection.
P302 + P352 IF ON SKIN; Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Quartz (SiO2) respirable particulates (RCS) EC: 238-878-4 14808-60-7 5 - 10% Yes
Methyltriacetoxysilane EC: 224-221-9 4253-34-3 1 - 5% Yes
Dodecamethylcyclohexasiloxane EC: 208-762-8 540-97-6 0.1 - 1% Yes
Octamethylcyclotetrasiloxane EC: 209-136-7 556-67-2 0.01 - 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If symptoms persist, seek medical advice.

Skin contact

Rinse with running water and soap. Obtain medical attention if irritation persists.

Symptoms: Redness, inflammation.

Eye contact

Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.

Symptoms: Corrosive, may cause permanent damage to eyes (impairment of vision).

Ingestion

Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

water, carbon dioxide, foam, powder

Unsuitable media

High pressure waterjet

Specific hazards

In the event of a fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx) can be released. Silicon dioxide

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin and eyes. Wear protective equipment. Ensure adequate ventilation.

Small spill

wipe up with paper towel and place in container for disposal.

Large spill

absorb onto inert absorbent material and place in sealed container for disposal.

Environmental

Do not empty into drains / surface water / ground water.

—

Related Products

Similar products with comparable safety profiles

L

LOCTITE SI 5331 WH TB100ML EN/DE

---

L

LOCTITE SI 5699 GY TB80ML SFDN

---

L

LOCTITE 573 TB250ML CH

---

L

LOCTITE 577 TB 3ML DE/FR

---

L

LOCTITE SI 5399 RD

---

L

LOCTITE SI 5300 RD

---

L

LOCTITE SI 5140 CR300ML

---

L

LOCTITE LB 8031

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid skin and eye contact. See advice in section 8

Storage

Store in a cool, well-ventilated place.

Hygiene

Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. Good industrial hygiene practices should be observed.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation/extraction.

Hands

Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.

Eyes

Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166.

Respiratory

Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A (EN 14387)

Skin/Body

Wear suitable protective clothing. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
White
Colour Intensity
---
Form
---
Odor
Acetic acid
Odor Threshold
---
Ph
Not applicable, Product is non-soluble (in water).
Melting Point
Not applicable, Product is a liquid
Boiling Point
> 100 °C (> 212 °F)
Flash Point
> 100 °C (> 212 °F)
Freezing Point
---
Softening Point
---
Solidification Point
< -40 °C (< -40 °F)
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
< 0,1 hPa (20 °C (68 °F))
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1,05 - 1,15 g/cm3 LCT STM 107; Weight per Gallon - Gardner Cup Method (25 °C (77 °F))
Flammability
The product is not flammable.
Upper Explosive Limit
Not applicable, The product is not flammable.
Lower Explosive Limit
Not applicable, The product is not flammable.
Explosive Limits
---
Auto Ignition Temperature
Not applicable, The product is not flammable.
Decomposition Temperature
Not applicable, Substance/mixture is not self-reactive, no organic peroxide and does not decompose under foreseen conditions of use
Solubility
Polymerises in presence of water. (20 °C (68 °F); Solvent: Water)
Partition Coefficient
Not applicable, Mixture
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
20.000,00 - 70.000,00 mPa.s LCT STM 10; Viscosity Brookfield (Brookfield; Instrument: RVT; 25 °C (77 °F); speed of rotation: 10 min-1; Spindle No: 7)
Kinematic Viscosity
> 20,5 mm2/s (40 °C (104 °F); )
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Reacts with oxidants, acids and lyes

Hazardous reactions

See section reactivity

Avoid

Excessive heat.

Incompatible

See section reactivity.

Decomposition

None if used for intended purpose.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Toxicity (Fish): LC50 (fish) > 100 mg/l (expert judgement) NOEC (fish) > 1 mg/l (expert judgement) The table below presents the data of the classified substances present in the mixture. | Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- |

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- | | Methyltriacetoxysilane 4253-34-3 | LC50 | > 110 mg/l | 96 h | Oncorhynchus mykiss | OECD Guideline 203 (Fish, Acute Toxicity Test) |

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1 Toxicity

Dodecamethylcyclohexasiloxane 540-97-6 | NOEC | Toxicity > Water solubility | 90 d | Oncorhynchus mykiss | OECD Guideline 210 (fish early life stage toxicity test)

12.1 Toxicity

Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | Octamethylcyclotetrasiloxane 556-67-2 | NOEC | 0,0044 mg/l | 93 d | Salmo gairdneri (new name: Oncorhynchus mykiss) | EPA OPPTS 797.1600 (Fish Early Life Stage Toxicity Test) | Octamethylcyclotetrasiloxane 556-67-2 | LC50 | Toxicity > Water solubility | 96 h | Oncorhynchus mykiss | EPA OTS 797.1400 (Fish Acute Toxicity Test) |

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1 Toxicity

Toxicity (aquatic invertebrates): EC50 (dafnia) >100 mg/l (OECD 211)

12.1 Toxicity

Methyltriacetoxysilane 4253-34-3 | EC50 | > 500 mg/l | 48 h | Daphnia magna | EU Method C.2 (Acute Toxicity for Daphnia)

12.1 Toxicity

Octamethylcyclotetrasiloxane 556-67-2 | EC50 | Toxicity > Water solubility | 48 h | Daphnia magna | EPA OTS 797.1300 (Aquatic Invertebrate Acute Toxicity Test, Freshwater Daphnids)

12.1 Toxicity

Chronic toxicity (aquatic invertebrates): NOEC (dafnia) > 1 mg/l (OECD 211)

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- | | Methyltriacetoxysilane 4253-34-3 | NOEC | 100 mg/l | 21 d | Daphnia magna | OECD 211 (Daphnia magna, Reproduction Test) |

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1 Toxicity

Dodecamethylcyclohexasiloxane 540-97-6 | NOEC | Toxicity > Water solubility | 21 d | Daphnia magna | OECD 211 (Daphnia magna, Reproduction Test)

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- | | Octamethylcyclotetrasiloxane 556-67-2 | NOEC | 7.9 μg/l | 21 d | Daphnia magna | EPA OTS 797.1330 (Daphnid Chronic Toxicity Test) |

Toxicity

Toxicity (Algae): NOEC (Algae) > 1 mg/l (OECD 201) EC50 (Algae) > 100 mg/l (OECD 201)

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- | | Methyltriacetoxysilane 4253-34-3 | EC50 | > 500 mg/l | 72 h | Raphidocelis subcapitata (new name: Pseudokirchneriella subcapitata) | EU Method C.3 (Algal Inhibition test) | | Methyltriacetoxysilane 4253-34-3 | NOEC | 500 mg/l | 72 h | Raphidocelis subcapitata (new name: Pseudokirchneriella subcapitata) | EU Method C.3 (Algal Inhibition test) |

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- | | Dodecamethylcyclohexasiloxane 540-97-6 | NOEC | Toxicity > Water solubility | 72 h | Pseudokirchneriella subcapitata | OECD Guideline 201 (Alga, Growth Inhibition Test) | | Dodecamethylcyclohexasiloxane 540-97-6 | EC50 | Toxicity > Water solubility | 72 h | Pseudokirchneriella subcapitata | OECD Guideline 201 (Alga, Growth Inhibition Test) |

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- | | Octamethylcyclotetrasiloxane 556-67-2 | EC50 | Toxicity > Water solubility | 96 h | Selenastrum capricornutum (new name: Pseudokirchneriella subcapitata) | EPA OTS 797.1050 (Algal Toxicity, Tiers I and II) | | Octamethylcyclotetrasiloxane 556-67-2 | EC10 | 0,022 mg/l | 96 h | Selenastrum capricornutum (new name: Pseudokirchneriella subcapitata) | EPA OTS 797.1050 (Algal Toxicity, Tiers I and II) |

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

Toxicity (microorganisms)

The mixture is classified based on calculation method referring to the classified substances present in the mixture. The table below presents the data of the classified substances present in the mixture. | Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- |

The mixture is classified based on the calculation method referring to the classified substances present in the mixture.

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- | | Methyltriacetoxysilane 4253-34-3 | EC10 | > 100 mg/l | 3 h | activated sludge of a predominantly domestic sewage | OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test) |

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- | | Octamethylcyclotetrasiloxane 556-67-2 | EC50 | Toxicity > Water solubility | 3 h | activated sludge | ISO 8192 (Test for Inhibition of Oxygen Consumption by Activated Sludge) |

12.2. Persistence and degradability

12.2 Persistence and degradability

Methyltriacetoxysilane 4253-34-3 | readily biodegradable | aerobic | 79,5 % | 28 d | OECD Guideline 301 F (Ready Biodegradability: Manometric Respirometry Test)

12.2 Persistence and degradability

Dodecamethylcyclohexasiloxane 540-97-6 | not readily biodegradable. | aerobic | 4,47 % | 28 d | OECD Guideline 310 (Ready BiodegradabilityCO2 in Sealed Vessels (Headspace Test)

12.2 Persistence and degradability

Octamethylcyclotetrasiloxane 556-67-2 | not readily biodegradable. | aerobic | 3,7 % | 29 d | OECD Guideline 310 (Ready BiodegradabilityCO2 in Sealed Vessels (Headspace Test)

12.2 Persistence and degradability

Dodecamethylcyclohexasiloxane 540-97-6 | Fresh water sediment | > 800 - 3.100 day | | OECD Test Guideline 308

12.2 Persistence and degradability

Octamethylcyclotetrasiloxane 556-67-2 | Fresh water sediment | 242 d | | OECD Test Guideline 308

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

Methyltriacetoxysilane 4253-34-3 | 0,25 | | QSAR (Quantitative Structure Activity Relationship)

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.3 Bioaccumulative potential

Dodecamethylcyclohexasiloxane 540-97-6 | 8,87 | 23,6 °C | other guideline:

12.3 Bioaccumulative potential

LogPow: 6,98; Temperature: 21,7 °C; Method: other guideline

12.3 Bioaccumulative potential

| Hazardous substances CAS-No. | Bioconcentration factor (BCF) | Exposure time | Temperature | Species | Method | | --- | --- | --- | --- | --- | --- | | Dodecamethylcyclohexasiloxane 540-97-6 | 6.605 | | | Cyprinus carpio | OECD Guideline 305 (Bioconcentration: Flow-through Fish Test) |

12.3 Bioaccumulative potential

Hazardous substances CAS-No. | Bioconcentration factor (BCF) | Exposure time | Temperature | Species | Method | --- | --- | --- | --- | --- | --- Octamethylcyclotetrasiloxane 556-67-2 | 12.400 | 28 d | | Pimephales promelas | EPA OTS 797.1520 (Fish Bioconcentration Test-Rainbow Trout)

12.4. Mobility in soil

The table below presents the data of the classified substances present in the mixture. | Hazardous substances CAS-No. | LogKoc | pH | Method | | --- | --- | --- | --- | | Dodecamethylcyclohexasiloxane 540-97-6 | 5,9 | | QSAR (Quantitative Structure Activity Relationship) | | Octamethylcyclotetrasiloxane 556-67-2 | 4,22 | | OECD Guideline 106 (OECD 106: Adsorption - Desorption using a Batch Equilibrium Method) |

12.5. Results of PBT / vPvB / PMT / vPvM assessment

### PBT/vPvB The following table contains only substances that fulfill the criteria as PBT and/or vPvB. The mixture is classified based on threshold limits referring to the classified substances present in the mixture. | Hazardous substances CAS-No. | PBT | vPvB | | --- | --- | --- | | Quartz (SiO2) respirable particulates (RCS) >=10% 14808-60-7 | According to Annex XIII to Regulation (EC) No 1907/2006, a PBT and vPvB assessment shall not be conducted for inorganic substances. | | | Dodecamethylcyclohexasiloxane 540-97-6 | Fulfilling PBT criteria | very Persistent and very Bioaccumulative (vPvB) | | Octamethylcyclotetrasiloxane 556-67-2 | Fulfilling PBT criteria | very Persistent and very Bioaccumulative (vPvB) | ### PMT/vPvM This mixture does not contain any substances that are assessed to be a PMT or vPvM. Based on available data, the classification criteria are not met.

The mixture contains substances (Dodecamethylcyclohexasiloxane and Octamethylcyclotetrasiloxane) that fulfill PBT and vPvB criteria. Quartz is exempt from assessment as an inorganic substance. No PMT or vPvM substances are present.

12.6. Endocrine disrupting properties

No substance data available. No data available.

12.7. Other adverse effects

No data available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local and national regulations.

Disposal

Do not empty into drains / surface water / ground water.

Waste Codes

08 04 09* waste adhesives and sealants containing organic solvents and other dangerous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE SI 5331 WH TB100ML FR/N?

The signal word is danger.

What is the physical form of LOCTITE SI 5331 WH TB100ML FR/N?

LOCTITE SI 5331 WH TB100ML FR/N is a liquid with white color. It has acetic acid odor.

What is the solubility of LOCTITE SI 5331 WH TB100ML FR/N?

Polymerises in presence of water. (20 °C (68 °F); Solvent: Water)

What is LOCTITE SI 5331 WH TB100ML FR/N used for?

Silicone sealant

What are the hazard statements for LOCTITE SI 5331 WH TB100ML FR/N?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H373: May cause damage to organs through prolonged or repeated exposure.

What is the melting point of LOCTITE SI 5331 WH TB100ML FR/N?

The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212 °F).