Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ZEP BRAKE WASH 5GL
- Product Code
- 000000000000050535
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
VEHICLE MAINTENANCE
Manufacturers & Suppliers
Zep Inc.
manufacturer
350 Joe Frank Harris Parkway, SE Emerson, GA 30137
877-428-9937
Emergency Contacts
Emergency Contact
877-428-9937
For a Medical Emergency
877-541-2016
CHEMTREC
800-424-9300
Emergency Contact
202-483-7616
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), hydrotreated light | 64742-49-0 | 70 - 90% | Yes |
| propan-2-ol | 67-63-0 | 5 - 10% | Yes |
| heptane | 142-82-5 | 1 - 3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. Remove person to fresh air. If signs/symptoms continue, get medical attention.
If skin irritation persists, call a physician. Wash off immediately with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash contaminated clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. Protect unharmed eye. If eye irritation persists, consult a specialist. Keep eye wide open while rinsing.
Keep respiratory tract clear. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.
Immediate Medical Attention
Take victim immediately to hospital.
Medical Treatment
Treat symptomatically. Symptoms may be delayed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains, inform respective authorities.
collect with non-combustible absorbent material
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of aerosol. Do not breathe vapours or spray mist. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Take precautionary measures against static discharges.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions. Electrical installations / working materials must comply with the technological safety standards.
Smoking, eating and drinking should be prohibited in the application area.
Take precautionary measures against static discharges. No smoking. Electrical installations / working materials must comply with the technological safety standards.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable
Vapours may form explosive mixture with air.
Heat, flames and sparks. Extremes of temperature and direct sunlight.
Oxidizing agents
Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
Persistence and degradability
Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- Flammable liquids, n.o.s., (HEPTANE, ISOPROPANOL)
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ZEP BRAKE WASH 5GL?
The signal word is danger.
What is the physical form of ZEP BRAKE WASH 5GL?
ZEP BRAKE WASH 5GL is a liquid appearing as liquid with clear color. It has hydrocarbon-like odor.
What is ZEP BRAKE WASH 5GL used for?
VEHICLE MAINTENANCE
What are the hazard statements for ZEP BRAKE WASH 5GL?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of ZEP BRAKE WASH 5GL?
The melting point is No data available and the boiling point is 64 °C.