NextSDS Logo
Safety Data Sheet EN

Trichloromethyl chloroformate

CAS 503-38-8
EC 207-965-9

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Trichloromethyl chloroformate
Product Code
A17444, L09533

Regulatory Identifiers

CAS Number
503-38-8 Check regulations →
EC Number
207-965-9 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

http://www.alfa.com

Emergency Contacts

Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 1 H330
Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS06 - Acute toxicity

GHS06

GHS05 - Corrosive

GHS05

Hazard Statements

H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
H330 Fatal if inhaled.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/physician.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
Trichloromethyl chloroformate EC: 207-965-9 503-38-8 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Symptoms: Fatal if inhaled.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: Causes severe skin burns.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye damage.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.

Eyes

Tightly sealed goggles. Full face protection.

Respiratory

Use self-contained respiratory protective device in emergency situations. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Density
1.64 g/cm3 (13.686 lbs/gal)
State Under Standard Conditions
---
Solubility In Water
Not determined
Flash Point
> 110 °℃ (> 230 °F)
Explosive Limits
---
Metal Corrosion
---
Solubility In Fat
---
Solidification Point
---
Physical State Data
liquid
Dynamic Viscosity
Not determined.
Voc Content
---
Boiling Point
128 ℃ (262 ºF)
Colour
---
Evaporation Rate
Not determined.
Vapor Pressure
13.7 hPa (10 mm Hg)
Melting Point
-57 ℃ (-71 ºF)
Partition Coefficient
Not determined.
Solubility
Not determined
Relative Density
Not determined.
Properties Status
---
Softening Point
---
Freezing Point
---
Molecular Weight
---
Odor
Pungent
Flammability
Not determined.
Lower Explosive Limit
Not determined.
Bulk Density
---
Upper Explosive Limit
Not determined.
Form
Liquid
Crystallisation Point
---
Vapor Density
Not determined.
Colour Intensity
---
Relative Evaporation Rate
---
Appearance
Not determined.
Kinematic Viscosity
Not determined.
Ph
Not determined.
Decomposition Temperature
Not determined.
Auto Ignition Temperature
Not determined.
Odor Threshold
Not determined.
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3390
Shipping Name
Toxic by inhalation liquid, corrosive, n.o.s. (Trichloromethyl chloroformate)
Transport Class
6.1 Toxic substances.
Packing Group
I
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Trichloromethyl chloroformate?

The signal word is danger.

What is the physical form of Trichloromethyl chloroformate?

Trichloromethyl chloroformate is a liquid appearing as not determined. . It has pungent odor.

What is the solubility of Trichloromethyl chloroformate?

Not determined

What is Trichloromethyl chloroformate used for?

SU24 Scientific research and development

What are the hazard statements for Trichloromethyl chloroformate?

This substance has 3 hazard statements:

  • H314: Causes severe skin burns and eye damage.
  • H318: Causes serious eye damage.
  • H330: Fatal if inhaled.

What is the melting point of Trichloromethyl chloroformate?

The melting point is -57 ℃ (-71 ºF) and the boiling point is 128 ℃ (262 ºF).