Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sterikon® plus Bioindicator for checks on autoclaving
- Product Code
- 1.10274
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- This product is a mixture. REACH Registration Number see section 3.
Identified Uses
Reagent for development and research
Manufacturers & Suppliers
Merck KGaA
manufacturer
Frankfurter Str. 250, D-64271 DARMSTADT
+49 (0)6151 72-0
Emergency Contacts
CHEMTREC (GB)
+(44)-870-8200418
CHEMTREC Ireland
+(353)-19014670
CHEMTREC India
001-803-017-9114
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No components need to be disclosed according to the applicable regulations.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most).
Immediate Medical Attention
Consult doctor if feeling unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapours.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapors, aerosols. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up with liquid-absorbent material (e.g. Chemizorb®). Dispose of properly. Clean up affected area.
Materials: liquid-absorbent material (e.g. Chemizorb®)
Related Products
Similar products with comparable safety profiles
Sterillium®
---
STABROM® 909 Biocide
UFI: D645-H06X-U00F-7MAW
3M™ Attest™ Biological Indicators for Steam 1261, 1261P, 1262, 1262P & 1262R
---
Prolex™ Staph Positive Control Reagent
---
Suprox ANK Sporicidal Disinfectant
---
BIOBAN™ PH 100 Antimicrobial
CAS: 122-99-6
WaveTrace™ Composit K5 Karl Fischer reagent
---
KATHON™ 886 F Biocide
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Tightly closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: Nitrile rubber; Minimum layer thickness: 0,11 mm; Break through time: > 480 min; Material tested: KCL 741 Dermatril® L. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Not required; except in case of aerosol formation.
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
No data available
Violent reactions possible with: The generally known reaction partners of water.
no information available
No data available
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sterikon® plus Bioindicator for checks on autoclaving?
The signal word is no signal word.
What is the physical form of Sterikon® plus Bioindicator for checks on autoclaving?
Sterikon® plus Bioindicator for checks on autoclaving is a liquid with no data available color. It has no data available odor.
What is Sterikon® plus Bioindicator for checks on autoclaving used for?
Reagent for development and research
What is the melting point of Sterikon® plus Bioindicator for checks on autoclaving?
The melting point is No data available and the boiling point is No data available.