Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sika® Tooling Agent N /Abglättmittel N
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Post treatment agent
Manufacturers & Suppliers
Sika Schweiz AG
national supplier
Tüffenwies 16, 8048 Zürich
+41 58 436 40 40
Emergency Contacts
Tox Info Suisse
+41(0)44 251 51 51
Tox Info Suisse
145
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| reaction mass of 5-chloro-2- methyl-2H-isothiazol-3-one and 2- methyl-2H-isothiazol-3-one (3:1) | 55965-84-9 | 0.0002 - 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water.
Remove contact lenses. Keep eye wide open while rinsing.
Do not induce vomiting without medical advice. Rinse mouth with water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Maintain air concentrations below occupational exposure standards. Ensure adequate ventilation, especially in confined areas.
Chemical-resistant, impervious gloves complying with an approved standard must be worn at all times when handling chemical products. Reference number EN 374. Follow manufacturer specifications. Butyl rubber/nitrile rubber gloves (> 0,1 mm) Recommended: Butyl rubber/nitrile rubber gloves.
Safety glasses
In case of inadequate ventilation wear respiratory protection. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. organic vapor filter (Type A) A1: < 1000 ppm; A2: < 5000 ppm; A3: < 10000 ppm Ensure adequate ventilation. This can be achieved by local exhaust extraction or by general ventilation. (EN 689 - Methods for determining inhalation exposure). This applies in particular to the mixing / stirring area. In case this is not sufficent to keep the concentrations under the occupational exposure limits then respiration protection measures must be used.
Protective clothing (e.g. Safety shoes acc. to EN ISO 20345, long-sleeved working clothing, long trousers). Rubber aprons and protective boots are additionaly recommended for mixing and stirring work.
No special environmental precautions required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sika® Tooling Agent N /Abglättmittel N?
The signal word is no signal word.
What is the physical form of Sika® Tooling Agent N /Abglättmittel N?
Sika® Tooling Agent N /Abglättmittel N is a liquid with colourless color. It has very faint odor.
What is Sika® Tooling Agent N /Abglättmittel N used for?
Post treatment agent
What are the hazard statements for Sika® Tooling Agent N /Abglättmittel N?
This substance has 1 hazard statement:
- Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
What is the melting point of Sika® Tooling Agent N /Abglättmittel N?
The melting point is No data available and the boiling point is No data available.