Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ANIOSYME DD1
- Product Code
- 1200000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning and pre-disinfection of medical devices
Manufacturers & Suppliers
Laboratoires ANIOS
manufacturer
Pavé du Moulin.59260.LILLE - HELLEMMES.FRANCE
+33 (0)3 20 67 67 67
www.anios.com
Emergency Contacts
INRS
+33(0)1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains hazardous substances, other substances representing a hazard, substances present below the minimum danger threshold, substances with occupational exposure limits, and other components.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PREPARATION 1200 | --- | 10 - 25% | Yes |
| N,N-DIDECYL-N-METHYL-POLY(OXYETHYL)AMMONIUM PROPIONATE | 94667-33-1 | 2.5 - 10% | Yes |
| SODIUM N-LAURYL B-IMINODIPROPIONATE EC: 239-032-7 | 14960-06-6 | 2.5 - 10% | Yes |
| ETHOXYLATED ISOTRIDECANOL | 69011-36-5 | 2.5 - 10% | No |
| MONOPROPYLENE GLYCOL EC: 200-338-0 | 57-55-6 | 10 - 25% | No |
| ETHANE-1,2-DIOL,HOMOPOLYMERE | 25322-68-3 | 2.5% | No |
| POLYHEXAMETHYLENE BIGUANIDE HYDROCHLORIDE | 27083-27-8 | 2.5% | Yes |
Notes
Full text of risk phrases appearing in section 3: see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the person away from the place of exposure and take him/her outside.
Remove all contaminated or stained clothing immediately. Do not use them again until they have been decontaminated. Rinse immediately and thoroughly with water.
Symptoms: skin irritation
If applicable, remove contact lenses. Wash thoroughly with soft clean water for 15 minutes, holding the eyelids open.
Symptoms: redness, pain or visual impairment
Rinse out the mouth, do not allow to drink, do not induce vomiting. Calm the person down and transfer immediately to hospital or doctor.
Immediate Medical Attention
In the event of swallowing: transfer immediately to hospital or doctor. If there is any redness, pain or visual impairment, consult an ophthalmologist. In the event of skin irritation, seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Any extinguishing agents are authorized: foam, sand, carbon dioxide, water, powder.
Firefighter Protection
Use autonomous insulating breathing apparatus and a full protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For small quantities, dilute the product with large quantities of water and rinse away.
Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for waste disposal. Prevent any material from entering drains or waterways.
Absorb any spilled product with absorbent non-combustible materials, and sweep away or remove with a shovel.
Materials: absorbent non-combustible materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Product for external use - do not swallow. Avoid all contact with skin or eyes. Handle in accordance with user instructions on label
Store between + 5 °C and + 35 °C in a dry, well ventilated place. Keep the container tightly closed. Store ONLY in the original package. Do not use after the expiry date mentioned on the packaging. Keep out of the reach of children
Observe precautions stated on label and also industrial safety regulations
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure the rooms are well-ventilated. Atmospheric concentrations at the workplace must not exceed the limit values given for normal conditions of use.
When handling this product, wear suitable gloves. Nitrile, latex or ninyle gloves. Gloves must be replaced immediately if they show signs of wear and tear.
Avoid all contact with eyes. Make safety goggles with side protection available to the personnel. Water source nearby.
Not applicable in normal conditions of use. In case of insufficient ventilation, wear suitable breathing apparatus. Particularly universal breathing apparatus, ABEK2P3 type
For further information, see § 11 of S.D.S. - Toxicological information.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The preparation is stable at the handling and storage conditions recommended per § 7 of the safety data sheet
Do not mix with other products.
At high temperatures, dangerous decomposition products may be produced, such as fumes, carbon dioxide and carbon monoxide, nitrogen oxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle or discard in accordance with the legislation in force, preferably by a collector or an approved company.
Recycle or discard in accordance with the legislation in force, preferably by a collector or an approved company.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
274 909 944
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This preparation was classified in compliance with the directive known as 1999/48/EC (Hazardous substances) have been taken into account.
Contains POLYHEXAMETHYLENE BIGUANIDE HYDROCHLORIDE. Marine Pollutant P.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ANIOSYME DD1?
The signal word is no signal word.
What is the physical form of ANIOSYME DD1?
ANIOSYME DD1 is a fluid liquid .
What is ANIOSYME DD1 used for?
Cleaning and pre-disinfection of medical devices
What are the hazard statements for ANIOSYME DD1?
This substance has 2 hazard statements:
- Possibility of irritation to the eyes and skin.
- Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
What is the melting point of ANIOSYME DD1?
The melting point is not specified. and the boiling point is not specified..