NextSDS Logo
Safety Data Sheet EN

ANIOS DDSH

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ANIOS DDSH
Product Code
1086000

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaning and disinfection of surfaces and equipments.

Manufacturers & Suppliers

Laboratoires ANIOS logo

Laboratoires ANIOS

manufacturer

Pavé du Moulin.59260.LILLE - HELLEMMES.FRANCE

+33 (0)3 20 67 67 67

http://www.anios.com

Emergency Contacts

INRS

+33(0)1 45 42 59 59

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

This preparation contains no hazardous substance present on its own at a sufficient concentration to give it the toxicological characteristics it would have in a 100% pure state. It contains PROPAN-1-OL as a hazardous substance, and ALKYLPROPYLENEDIAMINEGUANIDIUM ACETATE and N,N-DIDECYL-N-METHYL-POLY(OXYETHYL)AMMONIUM PROPIONATE as substances present below the minimum danger threshold.

Chemical Name CAS Number Concentration Hazardous
PROPAN-1-OL EC: 200-746-9 71-23-8 2.5 - 10% Yes
ALKYLPROPYLENEDIAMINEGUANIDIUM ACETATE 85681-60-3 2.5% Yes
N,N-DIDECYL-N-METHYL-POLY(OXYETHYL)AMMONIUM PROPIONATE 94667-33-1 2.5% Yes

Notes

Full text of risk phrases appearing in section 3: see section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move the person away from the place of exposure and take him/her outside.

Skin contact

Remove all contaminated or stained clothing immediately. Do not use them again until they have been decontaminated. Rinse immediately and thoroughly with water. In the event of skin irritation, seek medical advice.

Symptoms: skin irritation

Eye contact

If applicable, remove contact lenses. Wash thoroughly with soft clean water for 15 minutes, holding the eyelids open. If there is any redness, pain or visual impairment, consult an ophthalmologist.

Symptoms: redness, pain or visual impairment

Ingestion

Rinse out the mouth, do not allow to drink, do not induce vomiting. Calm the person down and transfer immediately to hospital or doctor. Show the label to the doctor.

Immediate Medical Attention

Transfer immediately to hospital or doctor if swallowed. Consult an ophthalmologist if there is any redness, pain or visual impairment. Seek medical advice in the event of skin irritation.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Special foams for polar liquids, powders and carbon dioxide.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid any contact with the skin and eyes. Consult the safety measures listed under headings 7 and 8.

Small spill

For small quantities, dilute the product with large quantities of water and rinse away.

Environmental

Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for waste disposal. Prevent any material from entering drains or waterways. Use drums to dispose of waste recovered in accordance with applicable regulations (see heading 13). If the product contaminates waterways, rivers or drains, alert the relevant authorities in accordance with statutory procedures

Cleanup methods

Absorb any spilled product using absorbent non combustible materials and sweep away or remove with a shovel. Put any waste in drums for disposal. Do not mix with any other waste. Do not collect the product for re-use.

Materials: absorbent non combustible materials

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid all contact with skin or eyes. Product for external use - do not swallow. Follow instructions with regard to conditions of use (read the technical notice).

Storage

Store ONLY in the original package. Do not use after the expiry date mentioned on the packaging. Recommended storage temperature: from +5°C to +30°C. Keep out of the reach of children.

Hygiene

Observe precautions stated on label and also industrial safety regulations.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure the rooms are well-ventilated. Atmospheric concentrations at the workplace must not exceed the limit values given for normal conditions of use.

Hands

When handling this product, wear suitable gloves. Due to the solvents present neoprene or nitrile type gloves are recommended. Gloves must be replaced immediately if they show signs of wear and tear.

Eyes

Avoid contact with eyes. Wear safety goggles. Provide eye washes in workshops where the product is constantly handled

Respiratory

Not applicable in normal conditions of use. In case of insufficient ventilation, with the risk of exceeding the TLVs (Treshold Limit Values)/TWA, wear suitable breathing apparatus. Particularly universal breathing apparatus, ABEK2P3 type

Skin/Body

For further information, see § 11 of S.D.S. - Toxicological information.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Auto Ignition Temperature
not specified.
Crystallisation Point
---
Upper Explosive Limit
---
Properties Status
---
Melting Point
not specified.
Freezing Point
---
Appearance
---
Physical State
fluid liquid
Odor Threshold
---
Colour Intensity
---
Relative Density
---
Softening Point
---
Solubility In Fat
---
Lower Explosive Limit
---
Density
< 1; +/- 0.987
Decomposition Temperature
not specified.
Colour
---
Relative Evaporation Rate
---
Partition Coefficient
---
Boiling Point
not specified.
Solubility
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Physical State Data
liquid
Cloud Point
---
Evaporation Rate
---
Solidification Point
---
Ph
6.50
Solubility In Water
Dilutable.
Bulk Density
---
Explosive Limits
---
Vapor Pressure
not relevant.
Odor
---
Vapor Density
---
Molecular Weight
---
Flammability
Incombustible.
State Under Standard Conditions
---
Flash Point
41.5 +/- 1 °C
Metal Corrosion
---
Voc Content
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The preparation is stable at the handling and storage conditions recommended per § 7 of the safety data sheet,

Avoid

Do not mix with other products. Do not spray onto a flame or any other incandescent objects. Avoid exposure to heat

Incompatible

Do not mix with other products.

Decomposition

At high temperatures, dangerous decomposition products may be produced, such as fumes, carbon dioxide and carbon monoxide, nitrogen oxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Recycle or discard in accordance with the legislation in force, preferably by a collector or an approved company.

Disposal

Recycle or discard in accordance with the legislation in force, preferably by a collector or an approved company.

Waste Codes

20 01 29 * detergents containing dangerous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

This preparation was classified in compliance with the directive known as (EC N°1907/2006).

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ANIOS DDSH?

The signal word is no signal word.

What is the physical form of ANIOS DDSH?

ANIOS DDSH is a fluid liquid .

What is ANIOS DDSH used for?

Cleaning and disinfection of surfaces and equipments.

What is the melting point of ANIOS DDSH?

The melting point is not specified. and the boiling point is not specified..