NextSDS Logo
Safety Data Sheet EN

CLEAN ON THE GO NABC CONCENTRATE [1]

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CLEAN ON THE GO NABC CONCENTRATE [1]
Product Code
4716

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Disinfectant

Uses advised against

For Industrial and Institutional Use Only

Manufacturers & Suppliers

Spartan Chemical Company, Inc. logo

Spartan Chemical Company, Inc.

manufacturer

1110 Spartan Drive Maumee, Ohio 43537 USA

800-537-8990

www.spartanchemical.com

Emergency Contacts

Emergency Contact

888-314-6171

CHEMTREC

800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage

Precautionary Statements

Wash hands and any exposed skin thoroughly after handling.
Wear eye / face protection
Wear protective gloves
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IMMEDIATELY CALL A POISON CENTER OR PHYSICIAN.
IF ON SKIN (or hair): Wash with plenty of soap and water. If skin irritation occurs: Get medical attention. Take off contaminated clothing and wash before reuse.
See Safety Data Sheet Section 4: "FIRST AID MEASURES" for additional information.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
water 7732-18-5 60 - 100% No
alkyl dimethyl benzyl ammonium chloride 68424-85-1 1 - 5% No
alcohol ethoxylate 68439-46-3 1 - 5% No
isopropanol 67-63-0 1 - 5% No
fragrance --- 0.1 - 1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a poison control center or physician if you feel unwell.

Skin contact

Wash with plenty of soap and water. Take off contaminated clothing and wash before reuse. If skin irritation occurs: Get medical attention.

Eye contact

Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IMMEDIATELY CALL A POISON CENTER OR PHYSICIAN.

Ingestion

Rinse mouth. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention if you feel unwell.

Immediate Medical Attention

IMMEDIATELY CALL A POISON CENTER OR PHYSICIAN (for eye contact). Call a poison control center or physician if you feel unwell (for inhalation). Get medical attention if you feel unwell (for ingestion). Get medical attention if skin irritation occurs.

Medical Treatment

Probable mucosal damage may contraindicate the use of gastric lavage.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide good general ventilation. If work practices generate dust, fumes, gas, vapors or mists which expose workers to chemicals above the occupational exposure limits, local exhaust ventilation or other engineering controls should be considered.

Hands

Wear rubber or other chemical-resistant gloves.

Eyes

Wear splash goggles.

Respiratory

Not required with expected use. If occupational exposure limits are exceeded or respiratory irritation occurs, use of a NIOSH/MSHA approved respirator suitable for the use-conditions and chemicals in Section 3 should be considered.

Skin/Body

Wear rubber or other chemical-resistant gloves.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid
Colour
Blue
Colour Intensity
---
Form
---
Odor
Floral fragrance
Odor Threshold
---
Ph
5.0-6.0
Melting Point
No information available.
Boiling Point
100 °C / 212 °F
Flash Point
> 100 °C / > 212 °F ASTM D56
Freezing Point
No information available.
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
< 1(Butyl acetate = 1)
Vapor Pressure
No information available.
Vapor Density
No information available.
Relative Density
1.00
Bulk Density
---
Density
---
Flammability
No information available.
Upper Explosive Limit
No information available.
Lower Explosive Limit
No information available.
Explosive Limits
---
Auto Ignition Temperature
No information available.
Decomposition Temperature
No information available.
Solubility
Soluble in water
Partition Coefficient
No information available.
Solubility In Water
Soluble in water
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Noinformationavailable.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

This material is considered to be non-reactive under normal conditions of use.

Hazardous reactions

Not expected to occur with normal handling and storage.

Avoid

Extremes of temperature and direct sunlight.

Incompatible

Strong oxidizing agents. Strong acids.

Decomposition

May include carbon monoxide, carbon dioxide (CO2) and other toxic gases or vapors.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Non Hazardous Product
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CLEAN ON THE GO NABC CONCENTRATE [1]?

The signal word is danger.

What is the physical form of CLEAN ON THE GO NABC CONCENTRATE [1]?

CLEAN ON THE GO NABC CONCENTRATE [1] is a liquid appearing as liquid with blue color. It has floral fragrance odor.

What is the solubility of CLEAN ON THE GO NABC CONCENTRATE [1]?

Soluble in water

What is CLEAN ON THE GO NABC CONCENTRATE [1] used for?

Disinfectant

What are the hazard statements for CLEAN ON THE GO NABC CONCENTRATE [1]?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage

What is the melting point of CLEAN ON THE GO NABC CONCENTRATE [1]?

The melting point is No information available. and the boiling point is 100 °C / 212 °F.

Compliance Scan

Free compliance check