Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Fin Clean All
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial cleaner
Manufacturers & Suppliers
Interflon b.v.
manufacturer
P.O. Box 1070 NL-4700 BB Roosendaal The Netherlands
+31(0)165.55.39.11
www.interflon.com
Emergency Contacts
UK National Poisons Emergency number
+44 870 600 6266
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Blend of organic and inorganic bases, surface-active substances and water.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-(2-butoxyethoxyethanol) EC: 203-961-6 | 112-34-5 | 2.5 - 10% | Yes |
| trisodium 2-[bis(carboxymethyl)amino]propanoate EC: 423-270-5 | 164462-16-2 | 2.5 - 10% | Yes |
| Alcools, C9-11, éthoxylés EC: 614-482-0 | 68439-46-3 | 2.5 - 10% | Yes |
| Alkylbenzeensulfonzuur, (C - C)-, natriumzouten EC: 270-115-0 | 68411-30-3 | 2.5 - 10% | Yes |
| Sodium Cumenesulfonate EC: 239-854-6 | 15763-76-5 | 2.5% | Yes |
| Kaliumhydroxide; bijtende potas EC: 215-181-3 | 1310-58-3 | 2.5% | Yes |
For the wording of the listed risk phrases refer to section 16.
Notes
This product does not contain "very worrisome substances" (SVHC) that are very dangerous to human health or the environment. (SVHC <0.1% (w / w) Regulation (EC) No. 1907/2006 (REACH), Article 57).
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Protective gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Practical experience has shown that gloves of Nitril offer sufficient protection. Glove thickness: 0,13 mm. Breakthrough time: > 15 minutes. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles (EN166)
Not required.
Protective work clothing (EN340)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3267
- Shipping Name
- CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.
- Transport Class
- 8 Corrosive substances.
- Packing Group
- III
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Fin Clean All?
The signal word is danger.
What is the physical form of Interflon Fin Clean All?
Interflon Fin Clean All is a liquid appearing as liquid, blue with blue color. It has mild odor.
What is the solubility of Interflon Fin Clean All?
Fully miscible.
What is Interflon Fin Clean All used for?
Industrial cleaner
What are the hazard statements for Interflon Fin Clean All?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H318: Causes serious eye damage.
What is the melting point of Interflon Fin Clean All?
The melting point is -12 C and the boiling point is > 100 C.