Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Original ATE Brake Fluid SL (DOT4)
- Product Code
- 03.9901-58xx.x / 7058xx
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Hydraulic fluid
Manufacturers & Suppliers
Continental Aftermarket GmbH
manufacturer
Guerickestrasse 7, 60488 Frankfurt, Germany
+49-69-7603-1
Emergency Contacts
Emergency Contact
+49 61 32 84 46 3
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours or de- composition products. Keep patient warm and at rest. If symptoms persist, call a physician.
Wash off with soap and water.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed, seek medical advice immediately and show this con- tainer or label. If a person vomits when lying on his back, place him in the recovery position.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation.
Material: butyl-rubber; Glove thickness: 0,7 mm; Breakthrough time: 480 min; Directive: DIN EN 374; Remarks: Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer.
In case of splash hazard, please wear protective goggles.
In case of insufficient ventilation, wear suitable respiratory equip- ment. Respirator with filter type A Respirator with a vapour filter (EN 141)
Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Original ATE Brake Fluid SL (DOT4)?
The signal word is no signal word.
What is the physical form of Original ATE Brake Fluid SL (DOT4)?
Original ATE Brake Fluid SL (DOT4) is a liquid appearing as liquid with yellow color. It has characteristic odor.
What is the solubility of Original ATE Brake Fluid SL (DOT4)?
no data available
What is Original ATE Brake Fluid SL (DOT4) used for?
Hydraulic fluid