Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Safebrake 6m [DOT4]
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industry sector: Functional Fluids, Type of use: Automobile Industry
Manufacturers & Suppliers
Continental Teves AG & Co. oHG
D-60441 Frankfurt / Germany
+49 69 - 7603 - 1
CLARIANT GmbH
manufacturer
D-65926 Frankfurt
+49 69 305 18000
Emergency Contacts
Emergency Contact
+49 69 305 6418
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
A mixture containing polyethylene glycol ethers, boric acid esters and amines with additives and stabilizers
First Aid Measures
Emergency procedures for chemical exposure incidents
When inhaled remove to fresh air and seek medical aid.
In case of contact with skin wash off immediately with plenty of water
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice
Summon a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray jet, dry powder, alcohol-resistant foam, carbon dioxide
In case of fires, hazardous combustion gases are formed; Carbon monoxide (CO), Nitrous gases (NOx)
Firefighter Protection
Use self-contained breathing apparatus
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drains or waterways
Pick up with absorbent material
Materials: sand, klesfigur, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures necessary if stored and handled as prescribed.
Keep container tightly closed and dry
Keep away from combustible materials
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Sufficient exhaust ventilation
For long-term exposure: Butyl rubber gloves. Minimum breakthrough time / gloves: 480 min. Minimum thickness / gloves 0.7 mm. For short-term exposure (speak protection): Nitrile rubber gloves. Minimum breakthrough time / gloves: 50 min. Minimum thickness / gloves 0.4 mm. These types of protective gloves are offered by various manufacturers. Please note the manufacturers' detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
safety glasses
Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure. Full mask to standard DIN EN 138. Filter A (organic gases and vapours) to standard DIN EN 141. The use of filter apparatus presupposes that the environment atmosphere contains at least 17% oxygen by volume, and does not exceed the maximum gas concentration, usually 0.5% by volume. Relevant guidelines to be considered include EN 136/141/143/371/372 as well as other national regulations.
Use barrier skin cream.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No hazardous reactions when stored and handled according to prescribed instructions.
Thermal decomposition: approx. 360 °C
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
authorised special waste incineration plant
In accordance with regulations for special waste, must be taken to an authorised special waste incineration plant.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product does not require a hazard warning label in accordance with EC Directives Classification according to the calculation procedure of the Dangerous Preparations Directive (1999/45/EC). Safety Data Sheet available for professional user on request.
MATC: not fixed.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Safebrake 6m [DOT4]?
The signal word is no signal word.
What is the physical form of Safebrake 6m [DOT4]?
Safebrake 6m [DOT4] is a liquid with yellow color. It has characteristic odor.
What is Safebrake 6m [DOT4] used for?
Industry sector: Functional Fluids, Type of use: Automobile Industry