THERMOVIT 300 GRIS ARGENT

In the event of inhalation, move the patient into the fresh air and keep him/her warm and still.

Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner. DO NOT use solvents or thinners.

Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open. Refer the patient to an ophthalmologist, in particular if there is any redness, pain or visual impairment.

Symptoms: redness, pain or visual impairment

In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor. Keep still. DO NOT induce vomiting. If swallowed accidentally, call a doctor to assess the need for monitoring and subsequent treatment in hospital. Show him the label.

Chemical powders, carbon dioxide, foams, and other extinguishing gases.

Never use water. Water is not generally recommended since it can be ineffective; however, it can be used successfully to cool containers exposed to the fire and to disperse fumes.

A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.

Do not breathe in smoke.

Eliminate any possible source of ignition and ventilate the premises. Avoid inhaling the fumes.

Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatom earth in drums for waste disposal.

Clean preferably with a detergent, do not use solvents.

Handle in well-ventilated areas. Prevent the formation of flammable or explosive concentrations in air and avoid vapour concentrations higher than the occupational exposure limits. Wear antistatic shoes and clothes. Avoid inhaling fumes. Use masks with a compressed air supply during spraying operations.

Keep the container tightly closed in a dry place. Keep away from all sources of ignition, heat and direct sunlight. Store in an upright position.

Smoking, eating and drinking are prohibited in premises where the preparation is used.

Prevent the accumulation of electrostatic charges with connections to earth. Use the product in premises where there are no naked flames or other sources of ignition. Do not use tools which may produce sparks. Do not smoke. Keep away from sources of heat, sparks and naked flames.

Ensure adequate ventilation, if possible with extractor fans at work posts and appropriate general extraction.

Protective creams may be used for exposed skin, but they should not be applied after contact with the product. Due to the solvents present, it is recommended that neoprene rubber or nitrile rubber gloves be worn

Use eye protectors designed to protect against liquid splashes

If this ventilation is insufficient to maintain the concentration of solvent fumes below the exposure limits, wear breathing apparatus. Where workers encounter concentrations higher than the exposure limits, they must wear suitable, approved masks.

Protective creams may be used for exposed skin, but they should not be applied after contact with the product.

high temperatures

carbon monoxide and dioxide, smoke and nitrogen oxide