Klüberfood NH1 CH 2-220

Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Remove contaminated clothing. If irritation develops, get medical attention. In case of contact, immediately flush skin with plenty of water.

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist.

Move the victim to fresh air. Do NOT induce vomiting. Rinse mouth with water.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

High volume water jet

Fire may cause evolution of: Carbon oxides

Standard procedure for chemical fires.

Evacuate personnel to safe areas. Use personal protective equipment.

Try to prevent the material from entering drains or water courses. Prevent further leakage or spillage if safe to do so.

collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product.

Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.

Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product.

Maintain air concentrations below occupational exposure standards.

For prolonged or repeated contact use protective gloves. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. In case of contact through splashing: Nitrile rubber, Protective index Class 1

Safety glasses with side-shields conforming to EN166

Not required; except in case of aerosol formation. Filter type A-P

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

Try to prevent the material from entering drains or water courses. Prevent further leakage or spillage if safe to do so. Local authorities should be advised if significant spillages cannot be contained.

Stable under normal conditions.

None reasonably foreseeable.

No dangerous reaction known under conditions of normal use.

No conditions to be specially mentioned.

No materials to be especially mentioned.

No decomposition if stored and applied as directed.

The product should not be allowed to enter drains, water courses or the soil.

Waste codes should be assigned by the user based on the application for which the product was used.