Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Calibrataion gas; Testgas N2 >99.99%
- Product Code
- 6810394
- Chemical Name
- N2
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Gas mixture for the calibration of sensors.
Uses advised against
Do not use for inflating balloons. Do not use for medical-clinical purposes. Do not use for private purposes (household).
Manufacturers & Suppliers
Dräger Safety AG & Co. KGaA
distributor
Revalstr. 1, D-23560 Lübeck
+49 (0) 451/882-0
http://www.draeger.com
Dräger Safety AG & Co. KGaA
manufacturer
Revalstr. 1, D-23560 Lübeck
+49 (0) 451/882-0
http://www.draeger.com
Emergency Contacts
Giftinformationszentrum Nord, Göttingen
(0551) 1 92 40
Dräger Werkschutz
+49 (0) 451/882-2395
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS04
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Nitrogen EC: 231-783-9 | 7727-37-9 | 99.99% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the casualty into fresh air and keep him immobile. Ensure of fresh air.
Symptoms: Suffocating, Risk of respiratory disorders
No special measure necessary.
not determined
Symptoms: not determined
not applicable
Medical Treatment
Treat symptoms. If necessary, give oxygen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Fire-extinguishing activities according to surrounding. ABC powder, Carbon dioxide, Water spray jet
no
No information available.
Cool endangered containers with water spray jet.
Firefighter Protection
Use breathing apparatus with independent air supply.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away and stay on the upwind side.
Suppress gases/vapours/mists with water spray jet
Suck off by room ventilation.
Related Products
Similar products with comparable safety profiles
5% CO2 IN AIR, HIGH LEVEL CALIBRANT GAS
CAS: 124-38-9
Precision Calibration Gas Mixture
---
Calibration gas, Test gas, H2S, NO2, CO, CO2, NH3, H2, SO2, CH4, C2H4, C3H8, C4H10, C4H8, C5H12, C6H14, C7H8, SF6, O2, N2-Bal [configured]
---
Calibration gas, Test gas, Kalibriergas H2S, CO, CO2, CH4, C3H8, C5H12, EtOH, N2-Bal [configured]
---
5% CO2 IN AIR, BASELINE CALIBRANT GAS
CAS: 124-38-9
5% CO2 IN AIR HIGH LEVEL CALIBRANT GAS (VS. PDB -7.2) 15.5 +/- 0.4 DOB
CAS: 124-38-9 (Unlabeled)
CALIBRATION MIXTURE FOR RADIOMETER BASEL AG CAL-GAS REF 064 0210
---
Compressed Gas, containing <= 21 Vol.-% Oxygen, Carbon dioxide, balance Nitrogen
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Care for thoroughly room ventilation, if necessary use in well ventilated area with local exhaust ventilation at workplace. No special measures necessary if used correctly. Open and handle container with care! Use only in well-ventilated areas. Do not inhale gases.
Keep in closed original container. Ventilate store-rooms thoroughly. Store only in original container at cool and aired place and at distance to acids and reducing materials. Keep container tightly closed, store at cool and aired place, open and handle carefully. Protect compressed gas-bottles from falling down.
At work do not eat, drink and smoke. Work in rooms with good ventilation. Wash hands before breaks and after work.
The product is not combustible. Pay attention to general rules of internal fire prevention. Avoid effect of heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
not determined
Protective gloves
safety goggles with side protection
In case of insufficient ventilation or long-term effect use breathing apparatus.
Light protective clothing.
Observe the expiry date.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Remains stable under normal conditions.
No hazardous reactions known.
No hazardous reactions known.
Danger of bursting container.
No data available
no
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Remove in accordance with local official regulations.
Remove in accordance with local official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1066
- Shipping Name
- Nitrogen, compressed
- Transport Class
- 2.2
no
no
no
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Calibrataion gas; Testgas N2 >99.99%?
The signal word is warning.
What is the physical form of Calibrataion gas; Testgas N2 >99.99%?
Calibrataion gas; Testgas N2 >99.99% is a compressed gas appearing as compressed gas with colourless color. It has odourless odor.
What is the solubility of Calibrataion gas; Testgas N2 >99.99%?
not determined
What is Calibrataion gas; Testgas N2 >99.99% used for?
Gas mixture for the calibration of sensors.
What are the hazard statements for Calibrataion gas; Testgas N2 >99.99%?
This substance has 1 hazard statement:
- H280: Contains gas under pressure; may explode if heated.
What is the melting point of Calibrataion gas; Testgas N2 >99.99%?
The melting point is No data available and the boiling point is ca. -196 °C.