Precision Calibration Gas Mixture

Supply fresh air. If required, provide artificial respiration. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.

Generally the product does not irritate the skin. Immerse frostbite in cool-warm water and seek medical attention. Wash with soap and water. If skin irritation occurs, consult a doctor.

Symptoms: In cases of contact with liquified material, frostbite may occur.

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

If swallowed and symptoms occur, consult a doctor.

Use fire fighting measures that suit the environment.

Closed containers may explode when exposed to extreme heat. This gas mixture is not flammable; however, containers, when involved in fire, may rupture or burst in the heat of the fire.

Use water spray to cool fire-exposed containers.

Treat any fumes as toxic. Keep people at a distance.

Inform authorities in case of gas release.

Ensure good ventilation/exhaustion at the workplace.

Store in a cool location. Cylinders should be firmly secured to prevent falling or being knocked over. Cylinders must be protected from the environment, and preferably kept at room temperature. Cylinders should be stored in dry, well-ventilated areas, away from sources of heat, ignition, and direct sunlight. Protect cylinders against physical damage. Full and empty cylinders should be segregated. Use a "first-on, first-out" inventory system to prevent full containers from being stored for long periods of time. Store in cool, dry conditions in well sealed receptacles.

Do not spray on a naked flame or any incandescent material. Do not cut, grind or weld on container that contains or contained product.

All ventilation should be designed in accordance with OSHA standard (29 CFR 1910.94). Use mechanical (general) ventilation for storage areas. Use appropriate ventilation as required to keep Exposure Limits in Air below TLV & PEL limits.

Not required.

Not necessary under normal conditions.

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure, use respiratory protective device that is independent of circulating air. Use suitable respiratory protective device in case of insufficient ventilation.

Not required.

Stable under normal conditions.

No further relevant information available.

No dangerous reactions known.

No further relevant information available.

Strong oxidizing agents.

Nitrogen Oxides (NOx).

Release all residual gas pressure in a well ventilated area. Verify the cylinder is completely empty (0 PSIG). Remove or cover any hazard labels. Return empty cylinder for recycling. NOTE: Check with the local waste authority before placing any gas cylinder into waste container for pickup. GASCO encourages the consumer to return all cylinders.