Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CONTROLIT Lecksucher Spray
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Leaktinder
Manufacturers & Suppliers
WBV GmbH & CO
distributor
Wiedenbrücker Strasse 3, D-59302 Oelde
+49-25-22780
http://www.wbv-velde.de
Emergency Contacts
Toxic and Informations center, Rheinische Friedrich-Wilhelms-Universität
0228/287-3211
Toxic and Informations center, Rheinische Friedrich-Wilhelms-Universität
0228/287-3333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Active substance with propellant.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dinitrogen oxide EC: 233-032-0 | 10024-97-2 | 2.5% | Yes |
| Fettalkohol-C12/14-2 E0-sulfat, Natriumsalz | 68891-38-3 | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
instantly wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water.
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water jet. Fight larger fire with alcohol-resistant foam.
Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Do not inhale explosion gases or combustion gases. Put on breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drainage system, surface or ground water.
Absorb liquid components with liquid-binding material.
Materials: liquid-binding material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions necessary if used correctly.
Store in cool, dry conditions in well sealed containers.
With appropriate handling and storage no special measures necessarily
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data, see Item 7.
With appropriate application not necessarily. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
By appropriate application not required. Avoid contact with the eyes.
Not necessary if room is well-ventilated.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
no dangerous reactions known
Protect from heat and direct sunlight.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be made according to official regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is not subject to classification according to the calculation methods of the 'General Classification Guideline for Preparations of the EC' as issued in the test version. The product is not subject to identification regulations under EC Directives and the Ordinance on Hazardous Materials (GofStoffV).
Safety phrases: 56 Dispose of this material and its container to hazardous or special waste collection point. Special designation of certain preparations: Contains Kathon. May produce an allergic reaction. Safety data sheet available for professional user on request. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Keep out of the reach of children.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CONTROLIT Lecksucher Spray?
The signal word is warning.
What is the physical form of CONTROLIT Lecksucher Spray?
CONTROLIT Lecksucher Spray is a fluid with colourless color. It has odourless odor.
What is CONTROLIT Lecksucher Spray used for?
Leaktinder
What is the melting point of CONTROLIT Lecksucher Spray?
The melting point is 0°C and the boiling point is 68°C.