NextSDS Logo
Safety Data Sheet EN

SALT AND VINEGAR 046.01186

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SALT AND VINEGAR 046.01186
Product Code
046.01186

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

K

KERRY INGREDIENTS UK

national supplier

PORTBURY WAY, ROYAL PORTBURY DOCK, BRISTOL BS20 6XN

01275 378500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Eye Irrit.
Skin Irrit.

GHS Pictograms

Hazard Statements

IRRITATING TO EYES AND SKIN

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

MIXTURE OF VARIOUS EDIBLE SUBSTANCES TO BE USED AS A SEASONING/ FLAVOURING FOR SNACK PRODUCTS.

DOES NOT CONTAIN ANY CHEMICALS LISTED IN THE APPROVED SUPPLY LIST (7 $ ^{TH} $ ED) FOR THE CLASSIFICATION AND LABELLING OF SUBSTANCES AND PREPARATIONS DANGEROUS FOR SUPPLY

Notes

DOES NOT CONTAIN ANY CHEMICALS LISTED IN THE APPROVED SUPPLY LIST (7TH ED) FOR THE CLASSIFICATION AND LABELLING OF SUBSTANCES AND PREPARATIONS DANGEROUS FOR SUPPLY.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove the affected individual to fresh air. Keep at rest in the most comfortable position.

Skin contact

Remove contaminated clothing. Wash skin with large volumes of water or soap & water.

Symptoms: Irritation, sign of tissue damage

Eye contact

Irrigate with water for at least 10 minutes.

Symptoms: Irritation, evidence of damage

Ingestion

Rinse mouth with water. Give up to one cup (half pint) of milk or water. DO NOT INDUCE VOMITING.

Immediate Medical Attention

If irritation persists, or sign of tissue damage is apparent obtain medical advice immediately (skin). Obtain medical advice if any irritation or evidence of damage is apparent (eyes). Obtain medical advice (ingestion). Obtain medical advice if symptoms continue (inhalation).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

foam or water extinguishers

Specific hazards

Decomposition of products are possible. Heat may build pressure in closed containers causing them to rupture.

Instructions

Keep cool with water spray.

Firefighter Protection

Do not enter fire area without proper protection & self-contained breathing apparatus. Avoid inhalation of fumes & smoke evolved in fire.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid inhalation & contact with skin & eyes.

Cleanup methods

Spillages should swept or vacuumed up, removed to a disposal container.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good occupational hygiene & safety practices in well-ventilated areas. Avoid contact with skin & eyes. Self-contained breathing apparatus should be worn if there is a risk of exposure to high concentrations of fumes or thermal decomposition products from heated material.

Storage

Store under cool dry ambient conditions in sealed containers as supplied.

Hygiene

Handle in accordance with good occupational hygiene & safety practices

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good ventilation is required in handling areas. Dust levels should not exceed 10mg/cu m.

Hands

Recommended to wear PVC gloves.

Eyes

Minimum protection e.g. safety glasses is recommended.

Respiratory

Where ventilation is limited and may be inadequate, wear self-contained breathing apparatus.

Skin/Body

Overalls are sufficient.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
---
Colour Intensity
---
Properties Status
---
Physical State Data
solid
Relative Evaporation Rate
---
Bulk Density
Not applicable.
Dynamic Viscosity
---
State Under Standard Conditions
---
Odor Threshold
---
Metal Corrosion
---
Form
---
Relative Density
---
Lower Explosive Limit
---
Vapor Pressure
Not determined.
Decomposition Temperature
---
Freezing Point
Not applicable
Solidification Point
---
Solubility
---
Colour
---
Odor
Characteristic odour according to the commercial description of the product.
Evaporation Rate
---
Melting Point
Not applicable
Solubility In Fat
---
Crystallisation Point
---
Density
---
Vapor Density
---
Kinematic Viscosity
---
Cloud Point
---
Molecular Weight
---
Softening Point
---
Explosive Limits
---
Partition Coefficient
---
Flammability
---
Solubility In Water
---
Auto Ignition Temperature
Not determined
Upper Explosive Limit
---
Voc Content
---
Appearance
Powder
Physical State
Powder
Ph
---
Boiling Point
Not applicable
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Good stability at standard temperatures.

Avoid

excessively high temperatures

Incompatible

oxidising agents

Decomposition

Contact with water or storage under recommended conditions for one year should not produce dangerous decomposition products.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Land fill or incinerate under conditions approved by the local authority.

Disposal

Land fill or incinerate under conditions approved by the local authority.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

No specific regulatory information for the blend

Chemical Safety Assessment Not performed

Risk Phrases: R36/R38 Irritating to eyes and skin. Safety Phrase: S26 In case of contact with eyes rinse immediately with plenty of water and seek medical advice.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SALT AND VINEGAR 046.01186?

The signal word is no signal word.

What is the physical form of SALT AND VINEGAR 046.01186?

SALT AND VINEGAR 046.01186 is a powder appearing as powder . It has characteristic odour according to the commercial description of the product. odor.

What are the hazard statements for SALT AND VINEGAR 046.01186?

This substance has 1 hazard statement:

  • IRRITATING TO EYES AND SKIN

What is the melting point of SALT AND VINEGAR 046.01186?

The melting point is Not applicable and the boiling point is Not applicable.

Compliance Scanner

Scan your compliance