Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GETRIEBEÖL CLP 220 205L
- Product Code
- 4757
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Refer to description of material or preparation.
Manufacturers & Suppliers
LIQUI MOLY GmbH
manufacturer
Jerg-Wieland-Straße 4, D-89081 Ulm-Lehr
Emergency Contacts
LIQUI MOLY GmbH
(+49) 0731-1420-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The data for this section has not been processed yet.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person from danger area. Supply person with fresh air and consult doctor according to symptoms.
Wash thoroughly with soap and copious water - remove contaminated clothing immediately. If skin irritation occurs (redness etc.), consult doctor.
Symptoms: redness
Wash thoroughly for several minutes using copious water. Seek medical help if necessary. Keep Data Sheet available.
Do not induce vomiting. Consult doctor immediately.
Immediate Medical Attention
Consult doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, Foam, Dry extinguisher
High volume water jet
In case of fire the following can develop: Decomposition products, Oxides of carbon, Oxides of nitrogen, Oxides of sulphur, H2S, Flammable vapour/air mixtures.
Firefighter Protection
Protective respirator with independent air supply. According to size of fire. Full protection, if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
If leakage occurs, dam up.
Collect using absorbant material (e.g. Universal binding medium)
Materials: Universal binding medium
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation. Eating, drinking, smoking, as well as food-storage, is prohibited in work-room. Take measures against electrostatic charging, if appropriate. Wash hands before breaks and at end of work. General hygiene measures for the handling of chemicals are applicable. Observe directions on label and instructions for use.
Not to be stored in gangways or stair wells. Store products only unopened, in original packing. Protect against moisture and store closed.
Eating, drinking, smoking, as well as food-storage, is prohibited in work-room. Wash hands before breaks and at end of work. General hygiene measures for the handling of chemicals are applicable.
Take measures against electrostatic charging, if appropriate.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation. This can be achieved by local suction or general air extraction.
Protective nitrile gloves (EN 374). Protective hand cream recommended. Additional information on hand protection - No tests have been performed. Selection made for preparations according to the best available knowledge and information on the ingredients. Selection of materials derived from glove manufacturer's indications. Final selection of glove material must be made taking the breakthrough times, permeation rates and degradation into account. Selection of a suitable glove depends not only on the material but also on other quality characteristics and varies from manufacturer to manufacturer. In the case of preparations the resistance of glove materials cannot be calculated in advance so it has to be tested before use. The exact breakthrough time of the glove material can be requested from the protective glove manufacturer and must be observed.
Tight fitting protective goggles (EN 166) with side protection, with danger of projections.
If OES or MEL is exceeded. Filter A - P2 (EN 141)
Protective working garments (e.g. safety shoes EN 344, long-sleeved protective working garments)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See point 7. Protect from humidity. Open flame, ignition sources
See point 7. Avoid contact with strong oxidizing agents. Avoid contact with other chemicals.
See point 5.3
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Soaked polluted cloths, paper or other organic materials represent a fire hazard and should be controlled, collected and disposed of.
Pay attention to local and national official regulations. E.g. dispose at suitable refuse site. E.g. suitable incineration plant.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- n.a.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GETRIEBEÖL CLP 220 205L?
The signal word is no signal word.
What is the physical form of GETRIEBEÖL CLP 220 205L?
GETRIEBEÖL CLP 220 205L is a liquid with brown color. It has characteristic odor.
What is GETRIEBEÖL CLP 220 205L used for?
Refer to description of material or preparation.
What is the melting point of GETRIEBEÖL CLP 220 205L?
The melting point is -24 - -22 °C and the boiling point is n.v..