Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DORMER Schneidöl M200 Nr.1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant and lubricant additive Lubricants, greases, release products ( cooling grease ) . (cooling grease)
Manufacturers & Suppliers
Wunsch Öle GmbH
manufacturer
Am Sportplatz 7, 40882 Ratingen
Emergency Contacts
Emergency Contact
+49 21 02 49 00 00
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Base oil with additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), solvent-dewaxed light paraffinic EC: 265-159-2 | 64742-56-9 | 25 - 50% | Yes |
| Di-tert-dodecyl polysulfide EC: 270-335-7 | 68425-15-0 | 1 - 10% | Yes |
| Zinc-bis[0,0-bis(2-ethylhexyl)]bis(dithiophosphate) EC: 224-235-5 | 4259-15-8 | 1 - 10% | Yes |
| Benzenesulfonic acid,C10-16-alkyl derivs.,calcium salts EC: 271-529-4 | 68584-23-6 | 1% | Yes |
| Sulfonic acids, Petroleum, Calcium Salts, Oil soluble EC: 263-093-9 | 61789-86-4 | 0.1 - 1% | Yes |
| Benzenesulfonic acid, mono-C16-24-alkyl derivs, calcium salts EC: 274-263-7 | 70024-69-0 | 0.1 - 1% | Yes |
Highly refined mineral oil (IP 346 DMSO extract < 3%).
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. When in doubt or if symptoms are observed, get medical advice.
Symptoms: Respiratory complaints
Wash immediately with: Water and soap.
Remove contact lenses, if present and easy to do. Continue rinsing. Wash with plenty of water. Call a physician immediately.
Do NOT induce vomiting. Observe risk of aspiration if vomiting occurs. Call a physician immediately.
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet, Foam, Extinguishing powder, Carbon dioxide (CO2), Sand. Co-ordinate fire-fighting measures to the fire surroundings.
High power water jet.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Provide fresh air. Avoid contact with skin, eyes and clothes.
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.
Take up mechanically. Take up with oil-absorbing compound.
Materials: oil-absorbing compound
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothes. Do not breathe vapour/aerosol. Provide fresh air. Respiratory protection necessary at: generation/formation of aerosols , insufficient ventilation , insufficient exhaust .
Keep/Store only in original container. Notice the directions for use on the label. Do not store at temperatures below : 0 °C . Recommended storage temperature : 5 °C - 40 °C . Protect against : Protect against direct sunlight. Keep away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
See protective measures under point 7 and 8.
Tested protective gloves must be worn Breakthrough time (maximum wearing time) : 4 hours ( NBR (Nitrile rubber), Thickness of the glove material : 0,4 mm ) . See information supplied by the manufacturer.
Wear eye/face protection.
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Fresh air masks are recommended, or combination filters A2-P2 for works of short duration.
Avoid contact with skin, eyes and clothes. Remove contaminated, saturated clothing immediately.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No information available.
No information available.
No information available.
Stable under recommended storage and handling conditions (See section 7).
Oxidising agent, strong.
Does not decompose when used for intended uses. Thermal decomposition can lead to the escape of irritating gases and vapours. Hazardous decomposition products : Carbon monoxide Carbon dioxide. aldehydes. Ketone , Sulphur oxides , Nitrogen oxides (NOx).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Send to a physico-chemical treatment facility under observation of official regulations.
ASN 12 01 07: mineral-based machining oils free of halogens (except emulsions and solutions). Send to a physico-chemical treatment facility under observation of official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Classification for mixtures and used evaluation method according to regulation (EC) No 1272/2008 [CLP].
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DORMER Schneidöl M200 Nr.1?
The signal word is no signal word.
What is the physical form of DORMER Schneidöl M200 Nr.1?
DORMER Schneidöl M200 Nr.1 is a liquid appearing as liquid with blue color. It has characteristic odor.
What is DORMER Schneidöl M200 Nr.1 used for?
Lubricant and lubricant additive Lubricants, greases, release products ( cooling grease ) . (cooling grease)
What are the hazard statements for DORMER Schneidöl M200 Nr.1?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of DORMER Schneidöl M200 Nr.1?
The melting point is not applicable .