Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SONAX XTREME WHEEL CLEANER PLUS
- Product Code
- 02303410
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Car care product
Manufacturers & Suppliers
SONAX GmbH
manufacturer
Münchener Straße 75, D-86633 Neuburg (Donau)
++49 (0)8431/53-0
Emergency Contacts
Emergency Phone Munich
+49 (0)89 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation of propellant, water and solvents
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sodium mercaptoacetate solution (46%) EC: 206-696-4 | 367-51-1 | 20 - 25% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 5 - 10% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 3 - 5% | Yes |
| sodium etasulfate EC: 204-812-8 | 126-92-1 | 1 - 3% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 1 - 3% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Wash the areas of skin affected with water and a mild detergent.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse out mouth and then drink plenty of water. Induce vomiting only, if affected person is fully conscious.
Symptoms: Gastric or intestinal disorders
Immediate Medical Attention
Call a doctor immediately.
Medical Treatment
Treatment in accordance with the doctor's assessment of the patient's condition. Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
No further relevant information available.
Cool endangered receptacles with water spray.
Firefighter Protection
The normal measures for firefighting are to be taken. Do not enter the hazardous area without a self-contained breathing apparatus. See Section 8 for information on personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear protective equipment. Keep unprotected persons away.
Do not allow to penetrate the ground/soil. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
INOX CLEANER NEW
UFI: 6594-Y024-200F-MJDN
ALUMINIUM WHEEL CLEANER - 500 ML
---
X1 eXcellent Heavy Duty cleaner - degreaser
UFI: G6N0-20RA-D00P-9H10
Alu-Devil Special (Wheel Cleaner)
UFI: SFXW-T890-D009-N3NT
INOX CLEAN
---
HOMEX CLEANER SPRAY
---
WINDEX® GLASS CLEANER
---
BINOX INTENSIEVE REINIGER 500ML
UFI: DMJ0-X09Y-G00Q-EQJM
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not pierce or burn, even after use.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation. This can be achieved by localised extraction or general ventilation. If this is not sufficient to keep the concentration below the occupational exposure limit, suitable breathing protection is to be worn.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Material of gloves: Natural rubber, NR. Recommended thickness of the material: ≥ 0.4 mm [EN 374]. Penetration time of glove material: Value for the permeation: Level 6 (≥480min)
Not required in normal cases
Not required in normal cases. Ensure good ventilation/exhaustion at the workplace.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reactions known.
No dangerous reactions known.
An increase in pressure may lead to bursting. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use.
strong oxidizing agents
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
There are no ecotoxicological data available on this mixture.
12.1 Toxicity
12.2 Persistence and degradability
The surface-active substances contained in the product meet the requirement of the EU Detregent Regulation (EC/648/2004) for ultimate biodegradability for surfactants in detergents.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste must be disposed of while observing the local, official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Employment restrictions concerning juveniles must be observed. Employment restrictions concerning pregnant and lactating women must be observed.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SONAX XTREME WHEEL CLEANER PLUS?
The signal word is warning.
What is the physical form of SONAX XTREME WHEEL CLEANER PLUS?
SONAX XTREME WHEEL CLEANER PLUS is a aerosol with light red color. It has characteristic odor.
What is SONAX XTREME WHEEL CLEANER PLUS used for?
Car care product
What are the hazard statements for SONAX XTREME WHEEL CLEANER PLUS?
This substance has 3 hazard statements:
- H229: Pressurised container: May burst if heated.
- H302: Harmful if swallowed.
- H317: May cause an allergic skin reaction.
What is the melting point of SONAX XTREME WHEEL CLEANER PLUS?
The melting point is Undetermined. and the boiling point is 100 °C (Active ingredient data).