Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KLERWIPE ENHANCED PEROXIDE
- Product Code
- 118378E
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Biocide. Manual process
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
Ecolab Ltd.
manufacturer
PO Box 11; Winnington Avenue Northwich, Cheshire, United Kingdom CW8 4DX
+44 (0)1606 74488
Emergency Contacts
Emergency Contact
+441618841235
Trans-European
+32-(0)3-575-5555
Poison Information Centre
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention if symptoms occur.
Rinse with plenty of water.
Rinse with plenty of water.
Rinse mouth. Get medical attention if symptoms occur.
Medical Treatment
No specific measures identified.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None known.
Not flammable or combustible.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Advice for non-emergency personnel: Refer to protective measures listed in sections 7 and 8. Advice for emergency responders: If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.
DO NOT hermetically seal any defective containers, including drums (risk of bursting due to the decomposition of the product)
Sweep up and shovel into suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not mix with bleach or other chlorinated products – will cause chlorine gas.
Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers. Do not hermetically seal the container. Risk of overpressure and bursting in the event of decomposition in closed containers and in pipes.
Wash hands before breaks and immediately after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
In case of skin contact it is recommended to wear gloves to avoid oxidation effect (e.g. skin whitening)
No special protective equipment required.
No personal respiratory protective equipment normally required.
No special protective equipment required.
Consider the provision of containment around storage vessels.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Decomposes on heating. Contamination may result in dangerous pressure increases - closed containers may rupture.
No dangerous reaction known under conditions of normal use.
Do not mix with bleach or other chlorinated products – will cause chlorine gas.
None known.
bleach or other chlorinated products
chlorine gas
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
This product has no known ecotoxicological effects. No data available for fish, daphnia, or algae.
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
The surfactants contained in the product are biodegradable according to the requirements of the detergent regulation 648/2004/EC.
12.2 Persistence and degradability
Not applicable - inorganic
12.2 Persistence and degradability
12.2 Persistence and degradability
Readily biodegradable.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Diluted product can be flushed to sanitary sewer if regulations permit.
Diluted product can be flushed to sanitary sewer if regulations permit.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KLERWIPE ENHANCED PEROXIDE?
The signal word is no signal word.
What is the physical form of KLERWIPE ENHANCED PEROXIDE?
KLERWIPE ENHANCED PEROXIDE is a absorbed liquid appearing as absorbed liquid (wipes, pads, ...) with clear, colourless color. It has characteristic odor.
What is the solubility of KLERWIPE ENHANCED PEROXIDE?
soluble
What is KLERWIPE ENHANCED PEROXIDE used for?
Biocide. Manual process
What is the melting point of KLERWIPE ENHANCED PEROXIDE?
The melting point is Not applicable and/or not determined for the mixture and the boiling point is 100 °C.