Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EKamold® Cast-C
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial. release agent
Manufacturers & Suppliers
ESK Ceramics GmbH & Co. KG
manufacturer
Max-Schaidhauf-Str. 25, D 87437 Kempten/Allgäu
+4983156180
Emergency Contacts
National Response Center
+49/(0) 8677/83-2222
Emergency Contact
+49/(0) 621/60-43333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Boron nitride + water
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Boron nitride | --- | --- | No |
| water | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
No special measures required.
Wash with plenty of water or water and soap.
Rinse immediately with plenty of water. Seek medical advice in case of continuous irritation.
No special measures required. In cases of sickness seek medical advice (show label if possible).
Immediate Medical Attention
Seek medical advice in case of continuous irritation. In cases of sickness seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
not applicable
not applicable
not applicable
Use extinguishing measures appropriate to the source of the fire.
Firefighter Protection
Use respiratory protection independent of recirculated air.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not walk through spilled material. If material is released indicate risk of slipping.
For small amounts: Absorb with a liquid binding material such as diatomaceous earth and dispose of according to local/state/federal regulations.
Contain larger amounts and pump up into suitable containers.
Prevent material from entering surface waters, drains or sewers and soil.
Take up mechanically and dispose of according to local/state/federal regulations. Clean any slippery coating that remains using a detergent / soap solution or another biodegradable cleaner.
Materials: liquid binding material such as diatomaceous earth, detergent / soap solution or another biodegradable cleaner
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Stir well before use. Spilled substance increases risk of slipping.
Protect against frost. Keep container tightly closed.
No special precautions against fire and explosion required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
not required.
Recommendation: protective goggles.
not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
no hazardous reactions are known
no hazardous reactions are known
none known
none known
none known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
After drying, material can be disposed together with domestic waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Other national and local measures relating to the workplace, pollution control, environmental protection and waste control.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EKamold® Cast-C?
The signal word is no signal word.
What is the physical form of EKamold® Cast-C?
EKamold® Cast-C is a liquid with grey color. It has weak odor.
What is EKamold® Cast-C used for?
Industrial. release agent
What is the melting point of EKamold® Cast-C?
The melting point is not applicable and the boiling point is 100 °C.