Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EKamold TG
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
ESK Kempten GmbH
manufacturer
Max-Schaidhauf-Str. 25, D 87437 Kempten/Allgäu
0831/5618-0
ESK Kempten GmbH (Dept. WL-KP)
manufacturer
+49/8677/83-4888
Emergency Contacts
Works Fire Brigade
+49/8677/83-2222
National Response Center
+49/621/60-43333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Boron nitride powder, suspended in ethanol with auxiliaries
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethanol | 64-17-5 | 75% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Wash with plenty of water or water and soap.
Rinse immediately with plenty of water. Follow up check by oculist.
Rinse mouth with water. Drink plenty of water. Seek medical advice and clearly identify substance.
Immediate Medical Attention
Seek medical advice and clearly identify substance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, carbon dioxide.
water.
Hazardous combustion products: nitric gases, carbon dioxide, carbon monoxide, hydrogen cyanide.
Firefighter Protection
Use respiratory protection independent of recirculated air.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not introduce into sewer system or in shore-waters. Observe local bye-laws.
Absorb with a liquid binding material such as diatomaceous earth
Materials: diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation.
Keep away from sources of ignition and do not smoke. Cool endangered container(s) with water. Observe the general rules for fire prevention.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Observe information in section 7.
protective gloves.
gas mask filter A during prolonged exposure.
Preventive skin protection recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
If stored and handled in accordance with standard industrial practices no hazardous reactions are known.
Reacts with aluminium/ aluminium chloride, alkali/alkaline earth metals. Reacts violently with oxidizing agents under heat generation up to explosion.
If stored and handled in accordance with standard industrial practices and local regulations where applicable: none known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of according to regulations by incineration in a special waste incinerator. Small quantities may be disposed of in a domestic waste incinerator. Observe local bye-laws.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- Flammable liquid, n.o.s.
- Transport Class
- 3
- Packing Group
- II
Materials in combined packaging, with up to 3 litres per inner pack, and up to 12 litres per outer pack.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Highly flammable (EU Warning Label)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EKamold TG?
The signal word is na: r-phrases.
What is the physical form of EKamold TG?
EKamold TG is a liquid - suspension appearing as liquid - suspension with white color. It has alcohol like odor.
What is the solubility of EKamold TG?
not established
What is the melting point of EKamold TG?
The melting point is -114 °C and the boiling point is 78 °C.