Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KEMOX
- Product Code
- 02500002
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- MARA-P6JP-070T-NEK1
Identified Uses
Deliming agent, Descalant. Industrial uses (SU3), Professional uses (SU22). Washing and cleaning products (PC35). Industrial spraying (PROC7), Roller application or brushing (PROC10), Non industrial spraying (PROC11), Transfer of substance or mixture into small containers (PROC9), Treatment of articles by dipping and pouring (PROC13). Widespread use of non-reactive processing aid (ERC8a, ERC8d).
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
ZEP ITALIA SRL
manufacturer
Piazzale Luigi Cadorna, 2, 20123 Milano (MI) - Italy; Via Nettunense Km. 25.000, 04011 Aprilia (LT) - Italy
+39.06.926691
http://www.zep.it
ZEP Industries BV
manufacturer
Vierlinghweg 30, 4612 PN Bergen op Zoom, The Netherlands
+ 31 164 250 100
ZEP UK Ltd
distributor
Tanhouse Lane, Widnes Cheshire, WA8 0RD, United Kingdom
+44 (0)151 422 1000
http://www.zep.co.uk
Emergency Contacts
NHS
+44 0845 46 47
NHS
+44 08454 24 24 24
emergency number (europe)
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydrochloric acid EC: 231-595-7 | 7647-01-0 | 5 - 10% | Yes |
| Nonionic surfactants | --- | 5% | No |
| Perfumes | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints. In case of unconsciousness place patient stably in side position for transportation.
Call a doctor immediately. Immediately wash with water and soap and rinse thoroughly. Immediately rinse with water. Seek medical treatment.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Call a doctor immediately.
Medical Treatment
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, Foam
Formation of toxic gases is possible during heating or in case of fire. During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Wear fully protective suit. Mount respiratory protective device. Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons from danger area. Keep unprotected persons away.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water. Keep contaminated washing water and dispose of appropriately.
Absorb with liquid-binding material
Materials: sand, diatomite, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store in cool, dry place in tightly closed receptacles. Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. Use only in well ventilated areas.
Store in cool, dry place in tightly closed receptacles.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
Reacts with alkali (lyes).
No decomposition if used according to specifications.
Do not store together with oxidising and acidic materials.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3264
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (HYDROCHLORIC ACID)
- Transport Class
- 8
- Packing Group
- III
Warning: Corrosive substances.
Warning: Corrosive substances. Segregation groups: (SGG1) Acids. Stowage Category: B. Stowage Code: SW2 Clear of living quarters. Segregation Code: SG36 Stow 'separated from' SGG18-alkalis. SG49 Stow 'separated from' SGG6-cyanides
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KEMOX?
The signal word is danger.
What is the physical form of KEMOX?
KEMOX is a fluid with blue color. It has characteristic odor.
What is KEMOX used for?
Deliming agent, Descalant. Industrial uses (SU3), Professional uses (SU22). Washing and cleaning products (PC35). Industrial spraying (PROC7), Roller application or brushing (PROC10), Non industrial spraying (PROC11), Transfer of substance or mixture into small containers (PROC9), Treatment of articles by dipping and pouring (PROC13). Widespread use of non-reactive processing aid (ERC8a, ERC8d).
What are the hazard statements for KEMOX?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage.
What is the melting point of KEMOX?
The melting point is Undetermined. and the boiling point is >103 °C.