Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FAG Arcanol LOAD1000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None known.
Manufacturers & Suppliers
Schaeffler Technologies AG & Co. KG
manufacturer
Georg-Schäfer-Str. 30, 97421 Schweinfurt / GERMANY
+49 (0)9721 91 4681
http://www.schaeffler.com
Emergency Contacts
Advisory body
+49 (0)89-19240
24h
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polysulfides, di-tert-dodecyl EC: 270-335-7 | 68425-15-0 | 1 - 2.5% | Yes |
| Alkylamine/hexylphosph ate combination EC: 279-632-6 | 80939-62-4 | 1% | Yes |
| 2,6-di-tert-butyl-p-cresol EC: 204-881-4 | 128-37-0 | 0.25% | Yes |
Notes
Substances of Very High Concern - SVHC: substances are not contained or are below 0,1%.
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air. In the event of symptoms seek medical treatment.
When in contact with the skin, clean with soap and water. Consult a doctor if skin irritation persists.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Seek medical advice immediately. Do not induce vomiting.
Immediate Medical Attention
Seek medical advice immediately. In the event of symptoms seek medical treatment. Consult a doctor if skin irritation persists. If eye irritation persists: Get medical advice/attention.
Medical Treatment
Treat symptomatically. Forward this sheet to the doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam. Dry powder. Water spray jet. Carbon dioxide.
Full water jet.
Risk of formation of toxic pyrolysis products.
Do not inhale explosion and/or combustion gases.
Firefighter Protection
Use self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
High risk of slipping due to leakage/spillage of product. Forms slippery surfaces with water.
Do not discharge into the drains/surface waters/groundwater.
Take up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. No special measures necessary if used correctly. Wash hands before breaks and after work. Use barrier skin cream. Do not eat, drink or smoke when using this product.
Keep only in original container. Keep container tightly closed.
Wash hands before breaks and after work. Use barrier skin cream. Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation on workstation.
In full contact: > 0,4 mm: Nitrile rubber, >120 min (EN 374).
Safety glasses. (EN 166:2001)
Not required under normal conditions.
Not required under normal conditions.
Comply with applicable environmental regulations limiting discharge to air, water and soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal ambient conditions (ambient temperature).
Reactions with strong oxidizing agents and strong acids.
Reactions with strong oxidizing agents and strong acids. If product is heated above decomposition temperature toxic vapours may be released.
Strong heating.
Strong oxidizing agent.
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations.
Disposal in an incineration plant in accordance with the regulations of the local authorities. In according to RoHS!
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Relevant information under SECTION 6 to 8.
Relevant information under SECTION 6 to 8.
Relevant information under SECTION 6 to 8.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EEC-REGULATIONS: 1991/689 (2001/118); 1999/13; 2004/42; 648/2004; 1907/2006 (REACH); 1272/2008; 75/324/EEC (2008/47/EC); 453/2010/EC; (EU) 2015/830. TRANSPORT-REGULATIONS: DOT-Classification, ADR (2015); IMDG-Code (2015, 37. Amdt.); IATA-DGR (2015).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FAG Arcanol LOAD1000?
The signal word is no signal word.
What is the physical form of FAG Arcanol LOAD1000?
FAG Arcanol LOAD1000 is a pasty with dark brown color. It has like mineral oil odor.
What is FAG Arcanol LOAD1000 used for?
Lubricant
What is the melting point of FAG Arcanol LOAD1000?
The melting point is > 220°C/ 428°F and the boiling point is not determined.