NextSDS Logo
Safety Data Sheet EN

FAG Arcanol MULTITOP®

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FAG Arcanol MULTITOP®

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

F

FAG Kugelfischer Georg Schäfer AG

manufacturer

Postfach 1260, D-97419 Schweinfurt

09721/91-4681

Emergency Contacts

Emergency Contact

09721/91-0

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

Prolonged or repeated exposure may give rise to dermatitis.

Precautionary Statements

Avoid spillage.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Rolling bearing grease containing Lithium soap as thickener, highly refined mineral oils (base oil), synthetic oil and additives.

Notes

Dangerous components: None

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Seek medical advice.

Skin contact

Remove contaminated clothing and wash affected skin with water and soap.

Eye contact

Rinse immediately with plenty of water for several minutes and seek medical advice.

Ingestion

Do not induce vomiting. Obtain medical attention.

Immediate Medical Attention

If high pressure injection injuries occur, obtain medical attention immediately; surgery is urgently needed. Obtain medical attention for ingestion.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry fire extinguisher for fire group B, foam, chemical powder, carbon dioxide, water mist. Water mist for cooling endangered containers.

Unsuitable media

Do not use water in a jet.

Specific hazards

Combustion is likely to give carbon monoxide, carbon dioxide, nitrogen oxides, sulfur dioxide, soot, unburnt hydrocarbons, organic crack products.

Firefighter Protection

Fire-fighting in closed rooms requires trained personal with appropriate breathing equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Prevent further leakage or spillage. Prevent from entering into drains, ditches or rivers by using appropriate barriers.

Cleanup methods

Shovel into a suitable, clearly marked container for disposal in accordance with local regulations.

Materials: suitable, clearly marked container

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

When using do not eat or drink. When handling product in heavy containers safely footwear should be worn and proper handling equipment should be used. Prevent spillages or oil mist.

Storage

Avoid direct sunlight, heat sources and strong oxidising agents. Keep containers closed. Comply with local regulations for storage of water endangering products and inflammable products.

Hygiene

When using do not eat or drink.

Fire prevention

Fire group B according to EN 2. Oily clothes or papers must be handled like self-combusting substances.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Keep national regulations concerning inflammable and water endangering products.

Hands

Neoprene, PVC or nitril rubber gloves if splashes are likely to occur and if applicable. Otherwise use cream against skin irritations.

Eyes

Safety spectacles if splashes are likely to occur.

Respiratory

Not normally required. Use suction plant in case of oil mist.

Skin/Body

Minimise all forms of skin contact. Recommendation: Wear overalls.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Voc Content
---
Lower Explosive Limit
---
Freezing Point
---
Melting Point
---
Density
approx. 900 kg/m³
Odor Threshold
---
Physical State Data
solid
Partition Coefficient
---
Physical State
Semi-solid
Flash Point
approx. 200 °C (Base oil)
Properties Status
---
Odor
characteristic odour
Form
---
Dynamic Viscosity
---
Vapor Pressure
---
Ph
---
Crystallisation Point
---
Decomposition Temperature
---
Vapor Density
---
Appearance
Semi-solid, colour brown, characteristic odour.
Relative Evaporation Rate
---
Molecular Weight
---
Solidification Point
---
Softening Point
---
Relative Density
---
Kinematic Viscosity
---
Explosive Limits
---
Metal Corrosion
---
Solubility
---
Flammability
---
Colour
brown
Bulk Density
---
State Under Standard Conditions
---
Upper Explosive Limit
---
Boiling Point
---
Auto Ignition Temperature
---
Evaporation Rate
---
Solubility In Water
almost insoluble
Solubility In Fat
---
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal use conditions.

Avoid

Stable under normal use conditions.

Incompatible

Strong acids and strong oxidising agents.

Decomposition

None during normal handling and storage (see point 5 too). Thermal decomposition possible if maximum operating temperature is exceeded.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FAG Arcanol MULTITOP®?

The signal word is no signal word.

What is the physical form of FAG Arcanol MULTITOP®?

FAG Arcanol MULTITOP® is a semi-solid appearing as semi-solid, colour brown, characteristic odour. with brown color. It has characteristic odour odor.

What are the hazard statements for FAG Arcanol MULTITOP®?

This substance has 1 hazard statement:

  • Prolonged or repeated exposure may give rise to dermatitis.