NextSDS Logo
Wi

Wise Chem E-115 Part A

DANGER Liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Wise Chem E-115 Part A
Product Code
07030-E115A-P

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Mixes with product Part B to form an epoxy type safety coating for steel or concrete.
Uses Advised Against
Not fit for use in anything related to human consumption.

Overview

Wise Chem E-115 Part A is a paste substance commonly used mixes with product part b to form an epoxy type safety coating for steel or concrete..

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Skin Irr. Category 2 H315
Eye Irrit. Category 2 H319
Skin Sens. Category 1 H317
Carc. Category 1B H350
Aquatic Chronic Category 2 H411

GHS Hazard Pictograms & Safety Symbols

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS09 GHS Hazard Pictogram: Environmental hazard - Materials toxic to aquatic life and environment

GHS09

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H315: Causes skin irritation
  • H317: May cause an allergic skin reaction
  • H319: Causes serious eye irritation
  • H350: May cause cancer
  • H411: Toxic to aquatic life with long lasting effects

Precautionary Statements

  • P201: Obtain special instructions before use
  • P261: Avoid breathing dust/fume/gas/mist/vapours/spray
  • P264: Wash face, hands and any exposed skin thoroughly after handling
  • P280: Wear protective gloves/protective clothing/eye protection/face protection
  • IF exposed or concerned: Get medical advice/attention
  • P321: Specific treatment (see supplemental instructions on the administration of antidotes on this label)

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

WISE CHEM LLD.

national supplier

๐Ÿ“

P.O. BOX 633 NEW ALBANY OH 45054 US

๐ŸŒ

US

๐Ÿ“ž

+1 412-367-1259

๐Ÿ“ 

+1 412-367-1260

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

CHEMTREC

๐Ÿ“ž

703-741-5970

๐ŸŒ

US

๐Ÿ’ก

international number

Emergency Contact

๐Ÿ“ž

112

๐Ÿ’ก

(EC)1272/2008

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Barium Sulfate
EC: 231-784-4
7727-43-7 30-50% โš ๏ธ Hazardous
Bisphenol A - Epichlorohydrin polymer
EC: 500-033-5
25068-38-6 30-50% โš ๏ธ Hazardous
Titanium Dioxide
EC: 236-675-5
13463-67-7 5-10% โœ“ Non-hazardous

Composition Notes

For the full text of the H-Statements mentioned in this Section, see Section 16

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Move to fresh air in case of accidental inhalation of vapours. If symptoms persist, call a doctor.

๐Ÿ–๏ธ Skin Contact

Wash off immediately with soap and plenty of water. Rinse immediately with plenty of water for at least 20 minutes. If skin irritation persists, call a doctor.

Symptoms:

May cause an allergic skin reaction.

๐Ÿ‘๏ธ Eye Contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Remove contact lenses. If eye irritation persists, consult a specialist. Do not rub.

๐Ÿฝ๏ธ Ingestion/Swallowing

Rinse mouth. Drink plenty of water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Consult a physician.

Medical Treatment

Treat symptomatically.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
Liquid
Critical Property
๐Ÿ“Š Physical State Data
liquid
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Paste
๐ŸŽจ Colour
White
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Not available
๐Ÿ‘ƒ Odor
Ketone
๐Ÿ“Š Odor Threshold
Not available
๐Ÿงช Ph
8
๐ŸงŠ Melting Point
Not applicable
Critical Property
๐Ÿ’จ Boiling Point
79
Critical Property
๐Ÿ”ฅ Flash Point
= 182 / 360 F
Critical Property
๐Ÿ“Š Freezing Point
Not applicable
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
Not available
๐Ÿ’จ Vapor Pressure
Not available
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
1.34
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
Not available
๐Ÿ”ฅ Flammability
Not available
๐Ÿ“Š Upper Explosive Limit
Not applicable
๐Ÿ“Š Lower Explosive Limit
Not applicable
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
Not applicable
๐Ÿ“Š Decomposition Temperature
Not available
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Partition Coefficient
Not available
๐Ÿ“Š Solubility In Water
Insoluble in water
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
Not available
๐Ÿ“Š Kinematic Viscosity
105 cSt
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

Ensure adequate ventilation, especially in confined areas.

๐Ÿงค Hand Protection

Protective gloves.

๐Ÿ‘๏ธ Eye Protection

Safety glasses with side-shields as per CEN/EN166:2001.

๐Ÿ˜ท Respiratory Protection

Respirator with combination filter for vapor / particulate as per CEN/EN149:2001+A1:2009 - Gas & combined filters.

๐Ÿฆบ Skin/Body Protection

Boots, Long sleeved clothing.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

UN3082

๐Ÿ“ฆ Proper Shipping Name

Environmentally hazardous substance, liquid, n.o.s

โš ๏ธ Transport Hazard Class

9

๐Ÿ“‹ Packing Group

III

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Wise Chem E-115 Part A?

The signal word for this substance is "danger".

What is the physical form of Wise Chem E-115 Part A?

Wise Chem E-115 Part A is a liquid appearing as paste with white color. It has ketone odor.

What is Wise Chem E-115 Part A used for?

Mixes with product Part B to form an epoxy type safety coating for steel or concrete.

What are the hazard statements for Wise Chem E-115 Part A?

This substance has 5 hazard statements: H315: Causes skin irritation H317: May cause an allergic skin reaction H319: Causes serious eye irritation H350: May cause cancer H411: Toxic to aquatic life with long lasting effects

What is the melting point of Wise Chem E-115 Part A?

The melting point is Not applicable and the boiling point is 79.