Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Wise Chem E-115 Part A
- Product Code
- 07030-E115A-P
- Synonyms
- Wisechem E115
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Mixes with product Part B to form an epoxy type safety coating for steel or concrete.
Uses advised against
Not fit for use in anything related to human consumption.
Manufacturers & Suppliers
WISE CHEM LLD.
manufacturer
P.O. BOX 633, NEW ALBANY, OH 45054 US
+1 412-367-1259
Emergency Contacts
CHEMTREC
703-741-5970
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Barium Sulfate EC: 231-784-4 | 7727-43-7 | 30 - 50% | Yes |
| Bisphenol A - Epichlorohydrin polymer EC: 500-033-5 | 25068-38-6 | 30 - 50% | Yes |
| Titanium Dioxide EC: 236-675-5 | 13463-67-7 | 5 - 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours. If symptoms persist, call a doctor.
Wash off immediately with soap and plenty of water. Rinse immediately with plenty of water for at least 20 minutes. If skin irritation persists, call a doctor.
Symptoms: May cause an allergic skin reaction.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Remove contact lenses. If eye irritation persists, consult a specialist. Do not rub.
Rinse mouth. Drink plenty of water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Consult a physician.
Immediate Medical Attention
If skin irritation persists, call a doctor. If eye irritation persists, consult a specialist. If symptoms persist, call a doctor. Consult a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Dry powder, pellets, Water
Do not use water around molten metal.
Special exposure hazards in a fire: Thermal decomposition can lead to release of irritating gases and vapours
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Avoid contact with the skin and the eyes. Ensure adequate ventilation. Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak.
Do not allow material to contaminate ground water system. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes and clothing. Ensure adequate ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. When using, do not eat, drink or smoke. Wear personal protective equipment. Remove and wash contaminated clothing before re-use. Wash hands after handling compounds and before eating, smoking, using lavatory, and at the end of day.
Keep in properly labelled containers. Keep container tightly closed in a dry and well-ventilated place. Keep out of the reach of children.
Handle in accordance with good industrial hygiene and safety practice. When using, do not eat, drink or smoke. Remove and wash contaminated clothing before re-use. Wash hands after handling compounds and before eating, smoking, using lavatory, and at the end of day.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Protective gloves.
Safety glasses with side-shields as per CEN/EN166:2001.
Respirator with combination filter for vapor / particulate as per CEN/EN149:2001+A1:2009 - Gas & combined filters.
Boots, Long sleeved clothing.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable.
Hazardous polymerisation does not occur.
Excessive freezing over long periods of time degrades the resin. Freezing may cause a temporary base to develop. Excessive heat may increase viscosity and epoxide equivalent weights.
Strong oxidising agents. Strong acids. Strong bases.
Carbon oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s
- Transport Class
- 9
- Packing Group
- III
274, 335
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Wise Chem E-115 Part A known by?
Wise Chem E-115 Part A is also known as: Wisechem E115
What is the hazard signal word for Wise Chem E-115 Part A?
The signal word is danger.
What is the physical form of Wise Chem E-115 Part A?
Wise Chem E-115 Part A is a liquid appearing as paste with white color. It has ketone odor.
What is Wise Chem E-115 Part A used for?
Mixes with product Part B to form an epoxy type safety coating for steel or concrete.
What are the hazard statements for Wise Chem E-115 Part A?
This substance has 5 hazard statements:
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
- H350: May cause cancer
- H411: Toxic to aquatic life with long lasting effects
What is the melting point of Wise Chem E-115 Part A?
The melting point is Not applicable and the boiling point is 79°C.