Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Wise Chem E-212-F Part A
- Product Code
- 07030-E212FA-P
- Synonyms
- No Synonym
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Mixes with product Part B to form an epoxy type safety coating for steel or concrete.
Uses advised against
Not fit for use in anything related to human consumption.
Manufacturers & Suppliers
Wise Chem LLC
manufacturer
PO Box 633, New Albany, Ohio, 43054 USA
Pyrotek Inc.
distributor
705 West 1st Ave, Spokane, WA 99201-3909, United States
(509) 926-6212, 1-800-PYROTEK
Emergency Contacts
Chemtrec North America
1-800-424-9300
Chemtrec Outside North America
+1 703 527 3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Barium Sulfate | 7727-43-7 | 30 - 50% | Yes |
| Bisphenol A - Epichlorohydrin polymer | 25068-38-6 | 10 - 30% | Yes |
| Methyl ethyl ketone | 78-93-3 | 1 - 10% | Yes |
| Titanium Dioxide | 13463-67-7 | 1 - 10% | No |
| n-Butyl glycidyl ether (BGE) | 2426-08-6 | 1 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapors. Oxygen or artificial respiration if needed. If symptoms persist, call a physician.
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. Cover wound with sterile dressing. Do not apply greases or ointments. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a specialist.
Rinse mouth. In the event of ingestion, administer 3-4 glasses of water. Consult a physician. Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol-resistant foam.
None known.
Keep product and empty container away from heat and sources of ignition. Risk of ignition.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak.
Prevent further leakage or spillage if safe to do so.
Sweep up and shovel into suitable containers for disposal.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Wear personal protective equipment. Avoid dust formation in confined areas. Avoid contact with skin and eyes. Keep away from open flames, hot surfaces and sources of ignition. Do not smoke. Remove and wash contaminated clothing before re-use.
Keep containers tightly closed in a cool, well-ventilated place. Keep in properly labelled containers. Keep away from heat.
Avoid contact with skin and eyes. Remove and wash contaminated clothing before re-use.
Keep away from open flames, hot surfaces and sources of ignition. Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Hazardous polymerization does not occur.
Heating in air.
Strong oxidizing agents. Alkaline solutions. Strong acids.
Thermal decomposition can lead to release of irritating gases and vapors. Carbon dioxide (CO2). Carbon monoxide (CO). Aldehydes. Carbon oxides. Nitrogen oxides (NOx).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1263
- Shipping Name
- paint
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Wise Chem E-212-F Part A known by?
Wise Chem E-212-F Part A is also known as: No Synonym
What is the hazard signal word for Wise Chem E-212-F Part A?
The signal word is warning.
What is the physical form of Wise Chem E-212-F Part A?
Wise Chem E-212-F Part A is a liquid - solid appearing as suspension, paint, paste with grey, cream, light yellow color. It has ketone odor.
What is Wise Chem E-212-F Part A used for?
Mixes with product Part B to form an epoxy type safety coating for steel or concrete.
What are the hazard statements for Wise Chem E-212-F Part A?
This substance has 7 hazard statements:
- H302: Harmful if swallowed
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
- H332: Harmful if inhaled
- H341: Suspected of causing genetic defects
- H351: Suspected of causing cancer
What is the melting point of Wise Chem E-212-F Part A?
The melting point is No data available and the boiling point is No data available.