Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Wise Chem E-212-F Part A
- Product Form
- Epoxy resin solution
- Product Code
- 07030-E212FA-P
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Mixes with product Part B to form an epoxy type safety coating for steel or concrete.
Uses advised against
Not fit for use in anything related to human consumption.
Manufacturers & Suppliers
Wise Chem LLC
manufacturer
PO Box 97147, Pittsburgh PA 15229
(412) 367-1259
Pyrotek Engineering Materials Ltd.
distributor
Garamonde Drive Wymbush, Milton Keynes MK8 8LN UK
+44 (0) 1908 561155
Emergency Contacts
Chemtrec North America
(800) 424-9300
Chemtrec Outside North America
+1 703 527 3887
Europe
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Barium Sulfate EC: 231-784-4 | 7727-43-7 | 30 - 50% | Yes |
| Bisphenol A - Epichlorohydrin polymer EC: 500-033-5 | 25068-38-6 | 10 - 30% | Yes |
| Methyl ethyl ketone EC: 201-159-0 | 78-93-3 | 5 - 15% | Yes |
| n-Butyl glycidyl ether (BGE) EC: 219-376-4 | 2426-08-6 | 1 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours. Oxygen or artificial respiration if needed. If symptoms persist, call a physician.
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. Cover wound with sterile dressing. Do not apply greases or ointments. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a specialist.
Rinse mouth. In the event of ingestion, administer 3-4 glasses of water. Consult a physician. Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, Carbon dioxide (CO2), Water spray, alcohol-resistant foam
None known.
Keep product and empty container away from heat and sources of ignition. Risk of ignition
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand and complete protective equipment for fire-fighting as per European standard EN 469
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak.
Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Wear personal protective equipment. Avoid dust formation in confined areas. Avoid contact with skin and eyes. Keep away from open flames, hot surfaces and sources of ignition. Do not smoke. Remove and wash contaminated clothing before re-use.
Keep containers tightly closed in a cool, well-ventilated place. Keep in properly labelled containers. Keep away from heat.
Remove and wash contaminated clothing before re-use. Avoid contact with skin and eyes.
Keep away from open flames, hot surfaces and sources of ignition. Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Mechanical ventilation and local exhaust is recommended.
Protective gloves.
Safety glasses with side-shields as per CEN/EN166:2001. If splashes or airborne spray are likely to occur, wear. Face-shield.
Respirator with combination filter for vapor / particulate as per CEN/EN14387:2004/A1:2008 - Gas & combined filters, As per European Standard, EN 141.
Long sleeved clothing, Chemical resistant apron, antistatic boots.
Prevent product from entering drains. Do not allow material to contaminate ground water system. Local authorities should be advised if significant spillages cannot be contained.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Hazardous polymerization does not occur.
Heating in air.
Strong oxidizing agents. Alkaline solutions. Strong acids.
Thermal decomposition can lead to release of irritating gases and vapours. carbon dioxide (CO2). Carbon monoxide (CO). aldehydes. Carbon oxides. Nitrogen oxides (NOx).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1263
- Shipping Name
- Paint
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Wise Chem E-212-F Part A?
The signal word is warning.
What is the physical form of Wise Chem E-212-F Part A?
Wise Chem E-212-F Part A is a liquid - solid appearing as suspension, paint, paste with grey cream light yellow color. It has ketone odor.
What is Wise Chem E-212-F Part A used for?
Mixes with product Part B to form an epoxy type safety coating for steel or concrete.
What are the hazard statements for Wise Chem E-212-F Part A?
This substance has 8 hazard statements:
- H302: Harmful if swallowed
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
- H332: Harmful if inhaled
- H341: Suspected of causing genetic defects
- H351: Suspected of causing cancer
- H412: Harmful to aquatic life with long lasting effects