Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PFINDER 890 Aerosol
- Product Code
- 11890245
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent/ Cleaner
Manufacturers & Suppliers
Pfinder KG
manufacturer
Rudolf-Diesel-Str. 14, D-71032 Böblingen
+49 (0)7031 2701-0
Pfinder KG (Research + Development)
manufacturer
+49 (0)7031 2701-73
Emergency Contacts
Vergiftungs-Informations-Zentrale Universitätsklinikum Freiburg
+49 (0)761 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of inhalation of aerosols remove the casualty into fresh air and seek medical advice.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. Then consult a doctor.
not relevant (aerosol can)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry powder, carbon dioxide, water spray jet
Can form explosive gas-air mixtures. Fire gas of organic material has to be classed invariably as respiratory poison. Vapours are heavier than air and spread on ground.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water. Do not allow to penetrate the ground/soil.
Absorb liquid components with liquid-binding material.
Materials: liquid-binding material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Open and handle receptacle with care. Use only in well ventilated areas. Ensure good interior ventilation, especially at floor level. (Fumes are heavier than air). Keep away from sources of ignition - No smoking. Avoid contact with eyes and skin. In case of formation of aerosols an adequate exhaustion is necessary.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C.
Avoid contact with eyes and skin.
Keep away from sources of ignition - No smoking. Protect against electrostatic charges. Do not spray onto a naked flame or any incandescent material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Solvent resistant gloves. Gloves of butyl rubber (thickness 0,5 mm; permeation time at least 8 h). Gloves of fluoric rubber (thickness 0,4 mm; permeation time at least 8 h). Gloves of nitrile rubber (thickness >= 0,38 mm; permeation >= 480 min). Gloves of PVC (thickness 0,7 mm; permeation time at least 8h). The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Use suitable respiratory protective device in case of insufficient ventilation. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Combined filter: Particle-filtering half mask (filter P2 or P3) and gas filter type AX
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
Danger of bursting. Forms explosive gas mixture with air.
No decomposition if used and stored according to specifications.
Strong oxidizing agents
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PFINDER 890 Aerosol?
The signal word is danger.
What is the physical form of PFINDER 890 Aerosol?
PFINDER 890 Aerosol is a aerosol with colourless color. It has solvent-like odor.
What is PFINDER 890 Aerosol used for?
Cleaning agent/ Cleaner
What are the hazard statements for PFINDER 890 Aerosol?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.