Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ISOFLEX LDS 18 SPECIAL A
- Product Code
- 004013
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Grease
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
Klüber Lubrication München
manufacturer
Geisenhausenerstr. 7, 81379 München, Deutschland
+49 (0) 89 7876 0
Klüber Lubrication Belgium Netherlands
national supplier
Rue Cardinal Mercier 100, 7711 Dottignies, Belgium
+32 56 483333
Emergency Contacts
Antigifcentrum / Centre antipoisons
070 245 245
Klüber Lubrication München
+49 89 7876 700
24 hrs
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
ester oil, Mineral oil, lithium soap
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,3,4-Thiadiazolidine-2,5-dithione, reaction products with hydrogen peroxide and tert-dodecanethiol EC: 939-692-2 | --- | 1 - 2.5% | Yes |
| White mineral oil (petroleum) EC: 232-455-8 | 8042-47-5 | 10 - 20% | No |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic; Baseoil — unspecified EC: 265-169-7 | 64742-65-0 | 10 - 20% | No |
| lithium 12-hydroxystearate EC: 231-536-5 | 7620-77-1 | 1 - 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
Remove contaminated clothing. If irritation develops, get medical attention. Wash off with soap and water.
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist.
Move the victim to fresh air. Do not induce vomiting without medical advice.
Medical Treatment
No information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
High volume water jet
Standard procedure for chemical fires.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. Exposure to decomposition products may be a hazard to health.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas.
Try to prevent the material from entering drains or water courses.
sweeping or vacuum
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product.
Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.
Wash face, hands and any exposed skin thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: Nitrile rubber; Break through time: > 10 min; Protective index: Class 1. Remarks: For prolonged or repeated contact use protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Safety glasses with side-shields
Not required; except in case of aerosol formation. Filter type: Filter type P
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No hazards to be specially mentioned.
No dangerous reaction known under conditions of normal use.
No conditions to be specially mentioned.
No materials to be especially mentioned.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product should not be allowed to enter drains, water courses or the soil.
Waste codes should be assigned by the user based on the application for which the product was used.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ISOFLEX LDS 18 SPECIAL A?
The signal word is no signal word.
What is the physical form of ISOFLEX LDS 18 SPECIAL A?
ISOFLEX LDS 18 SPECIAL A is a paste with yellow color. It has characteristic odor.
What is ISOFLEX LDS 18 SPECIAL A used for?
Grease
What is the melting point of ISOFLEX LDS 18 SPECIAL A?
The melting point is No data available and the boiling point is No data available.