Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Silicon ICP standard traceable to SRM from NIST SiO in NaOH 2 % 1000 mg/l Si CertiPUR commonly used reagent for analysis.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
Precautionary Statements
- IF ON SKIN: Wash with plenty of soap and water.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Aqueous solution
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sodium hydroxide | 1310-73-2 | 1-2% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
fresh air.
Symptoms:
Cough, Shortness of breath
🖐️ Skin Contact
wash off with plenty of water. Remove contaminated clothing.
👁️ Eye Contact
rinse out with plenty of water. Call in ophthalmologist.
🍽️ Ingestion/Swallowing
immediately make victim drink water (two glasses at most). Consult a physician.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
🧤 Hand Protection
full contact: Glove material: Nitrile rubber Glove thickness: 0,11 mm Break through time: - 480 min splash contact: Glove material: Nitrile rubber Glove thickness: 0,11 mm Break through time: - 480 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril L (full contact), KCL 741 Dermatril L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
👁️ Eye Protection
Safety glasses
😷 Respiratory Protection
required when vapours/aerosols are generated.
🦺 Skin/Body Protection
protective clothing
🌍 Environmental Exposure Controls
No special precautionary measures necessary.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1824
📦 Proper Shipping Name
SODIUM HYDROXIDE SOLUTION
⚠️ Transport Hazard Class
8
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Silicon ICP standard traceable to SRM from NIST SiO in NaOH 2 % 1000 mg/l Si CertiPUR?
The signal word for this substance is "warning".
What is the physical form of Silicon ICP standard traceable to SRM from NIST SiO in NaOH 2 % 1000 mg/l Si CertiPUR?
Silicon ICP standard traceable to SRM from NIST SiO in NaOH 2 % 1000 mg/l Si CertiPUR is a liquid with colourless color. It has odourless odor.
What is Silicon ICP standard traceable to SRM from NIST SiO in NaOH 2 % 1000 mg/l Si CertiPUR used for?
Reagent for analysis
What are the hazard statements for Silicon ICP standard traceable to SRM from NIST SiO in NaOH 2 % 1000 mg/l Si CertiPUR?
This substance has 2 hazard statements: H315: Causes skin irritation. H319: Causes serious eye irritation.
What is the melting point of Silicon ICP standard traceable to SRM from NIST SiO in NaOH 2 % 1000 mg/l Si CertiPUR?
The melting point is No information available. and the boiling point is No information available..