Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sulfur ICP standard traceable to SRM from NIST H₂SO₄ in H₂O 10000 mg/l S CertiPUR®
- Product Code
- 170385
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- see section 3
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Germany
+49 6151 72-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sulphuric acid | 7664-93-9 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
fresh air.
wash off with plenty of water. Remove contaminated clothing.
rinse out with plenty of water with the eyelid held wide open. Call in ophthalmologist if necessary.
make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapours.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapours, aerosols. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up with liquid-absorbent and neutralising material (e.g. Chemizorb® H⁺, Merck Art. No. 101595). Clean up affected area.
Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H⁺, Merck Art. No. 101595)
Related Products
Similar products with comparable safety profiles
Strontium ICP standard traceable to SRM from NIST Sr(NO₃)₂ in HNO₃ 2-3% 1000 mg/l Sr CertiPUR®
---
Iron ICP standard traceable to SRM from NIST, Fe(NO₃)₃ in HNO₃ 10% 10000 mg/l Fe CertiPUR®
---
Phosphorus ICP standard traceable to SRM from NIST H₃PO₄ in H₂O 1000 mg/l P Certipur®
---
Iron ICP standard traceable to SRM from NIST Fe(NO₃)₃ in HNO₃ 2-3% 1000 mg/l Fe CertiPUR®
---
Silicon ICP standard traceable to SRM from NIST SiO₂ in NaOH 2 % 1000 mg/l Si CertiPUR®
---
Potassium ICP standard traceable to SRM from NIST KNO₃ in HNO₃ 2-3% 1000 mg/l K CertiPUR®
---
Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 10000 mg/l Cu CertiPUR®
---
Arsenic standard solution traceable to SRM from NIST H₃AsO₄ in HNO₃ 0.5 mol/l 1000 mg/l As Certipur®
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions.
Tightly closed. Store at +15°C to +25°C.
Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet <(>, <)> supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Safety glasses
required when vapours/aerosols are generated. Recommended Filter type: Filter P 2 (acc. to DIN 3181) for solid and liquid particles of harmful substances. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
has a corrosive effect
Violent reactions possible with: The generally known reaction partners of water.
no information available
animal/vegetable tissues, Metals. Gives off hydrogen by reaction with metals.
no information available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (CONT. SULPHURIC ACID)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sulfur ICP standard traceable to SRM from NIST H₂SO₄ in H₂O 10000 mg/l S CertiPUR®?
The signal word is warning.
What is the physical form of Sulfur ICP standard traceable to SRM from NIST H₂SO₄ in H₂O 10000 mg/l S CertiPUR®?
Sulfur ICP standard traceable to SRM from NIST H₂SO₄ in H₂O 10000 mg/l S CertiPUR® is a liquid with colourless color. It has odourless odor.
What is Sulfur ICP standard traceable to SRM from NIST H₂SO₄ in H₂O 10000 mg/l S CertiPUR® used for?
Reagent for analysis
What are the hazard statements for Sulfur ICP standard traceable to SRM from NIST H₂SO₄ in H₂O 10000 mg/l S CertiPUR®?
This substance has 1 hazard statement:
- H290: May be corrosive to metals.