Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Iron ICP standard traceable to SRM from NIST, Fe(NO₃)₃ in HNO₃ 10% 10000 mg/l Fe CertiPUR®
- Product Code
- 170376
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- This product is a mixture. REACH Registration Number see section 3.
Identified Uses
Reagent for analysis For additional information on uses please refer to the Merck Chemicals portal (www.merck-chemicals.com).
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Germany
+49 6151 72-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| nitric acid | 7697-37-2 | 10 - 20% | Yes |
| iron(III) nitrate | 10421-48-4 | 3 - 5% | Yes |
The Safety Data Sheets for catalogue items are available at www.merck-chemicals.com
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Call in physician.
Symptoms: Cough, Shortness of breath
After skin contact: wash off with plenty of water. Immediately remove contaminated clothing. If available swab with polyethylene glycol 400. Call a physician immediately.
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist.
After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.
Symptoms: Bloody vomiting
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapours. Fire may cause evolution of: nitrogen oxides
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid substance contact. Do not breathe vapours, aerosols. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not empty into drains.
Collect, bind, and pump off spills. Take up with liquid-absorbent and neutralising material. Clean up affected area.
Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H⁺, Merck Art. No. 101595)
Related Products
Similar products with comparable safety profiles
Iron ICP standard traceable to SRM from NIST Fe(NO₃)₃ in HNO₃ 2-3% 1000 mg/l Fe CertiPUR®
---
Strontium ICP standard traceable to SRM from NIST Sr(NO₃)₂ in HNO₃ 2-3% 1000 mg/l Sr CertiPUR®
---
Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 10000 mg/l Cu CertiPUR®
---
Potassium ICP standard traceable to SRM from NIST KNO₃ in HNO₃ 2-3% 1000 mg/l K CertiPUR®
---
Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 1000 mg/l Cu CertiPUR®
---
Vanadium ICP standard traceable to SRM from NIST NH₄VO₃ in HNO₃ 15% 10000 mg/l V CertiPUR®
---
Vanadium ICP standard traceable to SRM from NIST NH₄VO₃ in HNO₃ 2-3% 1000 mg/l V CertiPUR®
---
Lithium ICP Standard traceable to SRM from NIST LiNO₃ in HNO₃ 2-3% 1000 mg/l Li CertiPUR®
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions.
Tightly closed. Store at +15°C to +25°C.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min; splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). This recommendation applies only to the product stated in the safety data sheet <(>, <) > supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Tightly fitting safety goggles
required when vapours/aerosols are generated.
Acid-resistant protective clothing
Do not empty into drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
See section 10.3
Risk of explosion with: Risk of ignition or formation of inflammable gases or vapours with: Alkali metals, Alkaline earth metals, Ammonia, alkalines, hydrides, halogens, halogen compounds, nonmetallic oxides, nonmetallic halides, nonmetallic hydrogen compounds, nonmetals, phosphides, nitrides, lithium silicide, hydrogen peroxide, organic combustible substances, oxidisable substances, organic solvent, Alcohols, Ketones, Aldehydes, anhydrides, Amines, anilines, Nitriles, organic nitro compounds, hydrazine and derivatives, acetylcholine, Metals, metal alloys, metallic oxides, acids
no information available
Metals, metal alloys (generation of hydrogen)
in the event of fire: See section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 2031
- Shipping Name
- NITRIC ACID
- Transport Class
- 8
- Packing Group
- II
yes
yes
yes
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Iron ICP standard traceable to SRM from NIST, Fe(NO₃)₃ in HNO₃ 10% 10000 mg/l Fe CertiPUR®?
The signal word is danger.
What is the physical form of Iron ICP standard traceable to SRM from NIST, Fe(NO₃)₃ in HNO₃ 10% 10000 mg/l Fe CertiPUR®?
Iron ICP standard traceable to SRM from NIST, Fe(NO₃)₃ in HNO₃ 10% 10000 mg/l Fe CertiPUR® is a liquid with tan color. It has odourless odor.
What is Iron ICP standard traceable to SRM from NIST, Fe(NO₃)₃ in HNO₃ 10% 10000 mg/l Fe CertiPUR® used for?
Reagent for analysis For additional information on uses please refer to the Merck Chemicals portal (www.merck-chemicals.com).
What are the hazard statements for Iron ICP standard traceable to SRM from NIST, Fe(NO₃)₃ in HNO₃ 10% 10000 mg/l Fe CertiPUR®?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Iron ICP standard traceable to SRM from NIST, Fe(NO₃)₃ in HNO₃ 10% 10000 mg/l Fe CertiPUR®?
The melting point is No information available. and the boiling point is No information available..