ARBOR MULTI VT

Expose affected person to fresh air.

Remove contaminated clothes and shoes and rinse thoroughly with plenty of water and soap.

Rinse thoroughly with plenty of water for at least 10 minutes keeping eyelids open. Remove contact lenses if this can be done easily. In case of contact with hot product, rinse thoroughly with plenty of water to dissipate heat.

Do not induce vomiting to avoid aspiration into the respiratory tracts. Wash out thoroughly the mouth with water.

Foam, carbon dioxide, dry chemical powder, water mist, water.

High pressure water jet.

Containers may explode if involved in fire.

Cool down with water the containers don't get involved in fire to avoid their possible explosion. Use water jet only to cool down surfaces exposed to fire.

Avoid ingestion of product. Avoid contact with skin and eyes by wearing appropriate protective clothing. Avoid to breathe fumes and aerosols. Surfaces on which the product has been spilled may become slippery. Wear personal protection equipment. See protective measures under point 7 and 8.

Contain small spills with absorbent material.

dike, absorb and shovel up into suitable containers for disposal

Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.

shovel up into suitable containers for disposal

Materials: absorbent material

Avoid ingestion. Avoid frequent and prolonged skin contact and contact with eyes. Provide adequate ventilation to avoid mist or aerosol. Don't smoke or use spare flames; avoid contact with spark or other sources of ignition. Don't work near open container to avoid high concentration of vapours. Don't eat or drink during use.

Store under cover in the original container securely closed away from heat and sources of ignition. Do not store in the open air.

Don't eat or drink during use.

Don't smoke or use spare flames; avoid contact with spark or other sources of ignition.

Avoid production and diffusion of mist and aerosol with utilization of localized ventilation/aspiration or other required precautions.

Wear suitable gloves (i.e. neoprene, nitrile). Gloves should be changed when they show wear. The kind of gloves and the term of use must be decided from employer with regard to processing and to allow for DPI legislation and glove producer's indications. Wear gloves only with clean hands.

Chemical goggles and face shield in case of oil splashes.

None required under normal conditions of use. Use approved full face respirator with organic vapour filter cartridge if the recommended exposure limits are exceeded.

Wear suitable protective clothing (for further information, refer to CEN-EN 14605); change it immediately in case of large contamination and wash it before subsequent use.

Adopt all required precaution to avoid product immission in environment (e.g., blasting systems, catch basins, ...). Refer to technical precautions and also to sections 6.2, 6.3, 7.2, 12 and 13.

The product is stable under normal conditions of use.

Read carefully all information provided in other sections of heading 10.

Not expected under normal conditions of use.

This product must be kept far from heat sources. In any case, avoid exposing product to temperatures above the flash point.

Strong oxidizing agents, hard acids and bases.

Oxides of carbon, compounds of sulphur, phosphorus, nitrogen and hydrogen sulfide.

Dispose in accordance with local or national regulations via authorised person/licensed waste disposal contractor. Recover if possible.

The used product has to be considered a special waste to be classified in accordance to Directive 2008/98/EC on waste and related legislation.