Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FAVOR PAC 230
- Chemical Name
- Sodium polyacrylate, cross-linked
Regulatory Identifiers
- CAS Number
- 9003-04-7 Check regulations →
- EC Number
- Polymer Check regulations →
Identified Uses
Industrial use
Manufacturers & Suppliers
Evonik Industries AG
manufacturer
Bäkerpfad 25, 47805 Krefeld, Germany
Emergency Contacts
Evonik Industries AG
+49-2151-38-1370
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash with soap and water. Remove contaminated clothing.
Rinse for a prolonged period with plenty of water; if necessary, consult a doctor.
Seek medical advice if feeling unwell. In case of swallowing: Drink plenty of water.
Immediate Medical Attention
if necessary, consult a doctor
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water jet, carbon dioxide, foam, dry extinguishing agents
In case of fire carbon monoxide, carbon dioxide
Firefighter Protection
No special requirements.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Spilled product in contact with water or moisture causes surfaces to become extremely slippery
Collect and flush small residuals with much water into the drain for subsequent biological waste effluent treatment.
Collect and flush small residuals with much water into the drain for subsequent biological waste effluent treatment.
Sweep up and shovel into suitable containers for disposal. Clean thoroughly. Repeat procedure if necessary.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use respiratory protection when exceeding limit (see chapter 8) and dust is formed. Ensure sufficient workplace ventilation.
Store in a dry place. Average temperature for loose bulk storage over 3 m³ must not exceed 50°C.
Take measures against electrostatic charge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure sufficient workplace ventilation.
not required
Protective goggles
Use respiratory protection when exceeding limit (see chapter 8) and dust is formed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under usual application conditions.
see section 10.2.
None known.
Decomposition above 200 °C.
No known incompatibility with other materials.
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of whilst observing local legal regulations, e.g. in a suitable incineration plant.
Dispose of whilst observing local legal regulations, e.g. in a suitable incineration plant.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FAVOR PAC 230?
The signal word is no signal word.
What is the physical form of FAVOR PAC 230?
FAVOR PAC 230 is a powder. with white color.
What is FAVOR PAC 230 used for?
Industrial use
What is the melting point of FAVOR PAC 230?
The melting point is Not applicable. and the boiling point is Not applicable..