Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- C.f.a.s. PAC
- Product Code
- 03555941190
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals, Refer to product literature for further details.
Manufacturers & Suppliers
Roche Diagnostics Limited
manufacturer
Charles Avenue, Burgess Hill, RH15 9RY West Sussex, United Kingdom
+44 1444 256000
Emergency Contacts
Product Safety / Vigilance (Roche Diagnostics Ltd.)
+44 (0)808 100 1920
Product Safety / Vigilance (Roche Diagnostics Ltd.)
1800 409 564
NPIS
+44 344 892 0111
24Hr
NHS Direct in Wales / NHS in England / NHS 24 in Scotland
111
24Hr
NHS Direct in Wales
+44 845 4647111
24Hr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium azide EC: 247-852-1 | 26628-22-8 | 0.25 - 1% | Yes |
| Sucrose EC: 200-334-9 | 57-50-1 | 30 - 50% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
Wash off with soap and water.
Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid dust formation. Refer to protective measures listed in sections 7 and 8.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Keep in suitable, closed containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Wash hands before breaks and at the end of workday.
Provide appropriate exhaust ventilation at places where dust is formed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of contact through splashing: - Material: Nitrile rubber - Break through time: > 30 min - Glove thickness: > 0,11 mm In case of full contact: - Material: butyl-rubber - Break through time: > 480 min - Glove thickness: > 0,4 mm Remarks: Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure water; Tightly fitting safety goggles
Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No decomposition if stored and applied as directed.
No data available
No data available
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No specific toxicity data available; product is not expected to adsorb on soil.
12.1 Toxicity
Sodium azide is classified as very toxic to aquatic life with long-lasting effects. It shows high toxicity to fish, daphnia, and algae.
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
Partition coefficient: n-octanol/water: Not applicable
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties for the environment at levels of 0.1% or higher.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Send to a licensed waste management company.
The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulatory information regarding EU and UK provisions, including REACH, POPs, and COMAH.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for C.f.a.s. PAC?
The signal word is no signal word.
What is the physical form of C.f.a.s. PAC?
C.f.a.s. PAC is a solid appearing as solid with light yellow color. It has odourless odor.
What is C.f.a.s. PAC used for?
Laboratory chemicals, Refer to product literature for further details.
What are the hazard statements for C.f.a.s. PAC?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of C.f.a.s. PAC?
The melting point is No data available and the boiling point is No data available.