Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- OMM 25 FR (A+)
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 1783-A060-800F-KPJS
Identified Uses
marking gasoil according legislation
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
NDT Europa BV
manufacturer
damsluisweg 77, 1332 EB almere / the netherlands
+31 (0) 36 5495000
http://www.ndt-europa.nl
Emergency Contacts
Emergency Contact
+31 (0)36 5495000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Solvent naphtha (petroleum), heavy arom. EC: 919-284-0 | 64742-94-5 | 25 - 50% | Yes |
| n-butyl phenyl ether EC: 214-426-1 | 1126-79-0 | 10 - 25% | Yes |
| Azo dye, similar to C.I. Solvent Red 19 EC: 260-124-8 | 56358-09-9 | 10 - 25% | Yes |
| Solvent naphtha (petroleum), heavy arom. EC: 265-198-5 | 64742-94-5 | 10 - 25% | Yes |
| Blend of highly refined mineral oil EC: 265-156-6 | 64742-53-6 | 2.5 - 10% | Yes |
| naphthalene EC: 202-049-5 | 91-20-3 | 1 - 2.5% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.
Rinse opened eye for several minutes under running water.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation - Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. - Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Respiratory protection: When using a liquid based on organic compound: - Recommended for organic vapour (type A) When using a dry powder: - Recommended for particulate filters (type P)
Protective work clothing Use protective suit.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport Class
- 9 Miscellaneous dangerous substances and articles.
- Packing Group
- III
Warning: Miscellaneous dangerous substances and articles.
Warning: Miscellaneous dangerous substances and articles.
Warning: Miscellaneous dangerous substances and articles.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for OMM 25 FR (A+)?
The signal word is danger.
What is the physical form of OMM 25 FR (A+)?
OMM 25 FR (A+) is a fluid with red color. It has aromatic odor.
What is the solubility of OMM 25 FR (A+)?
water: Not miscible or difficult to mix.
What is OMM 25 FR (A+) used for?
marking gasoil according legislation
What are the hazard statements for OMM 25 FR (A+)?
This substance has 8 hazard statements:
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
- H373: May cause damage to organs through prolonged or repeated exposure.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of OMM 25 FR (A+)?
The melting point is Undetermined. and the boiling point is >179 C.