Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Multi Element ICP Standard sol. (22E)
- Product Code
- CL01.39160
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- is not available for this substance as the substance or its use are exempted from registration according to Article 2 REACH Regulation (EC) No 1907/2006, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
AnalytiChem Belgium NV
manufacturer
Industriezone "De Arend" 2, B-8210 Zedelgem, BELGIUM
+32 50 28 83 20
Emergency Contacts
AnalytiChem Belgium NV
00 (32) 50.28.83.20
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrochloric acid 34- 37% (Pico-Pure) | 7647-01-0 | 10 - 15% | Yes |
| Nitric acid 67 - 69% (Pico-Pure) | 7697-37-2 | 10 - 15% | Yes |
| Hydrofluoric acid 47 - 51% (Pico-Pure) | 7664-39-3 | 0.1% | Yes |
For the full text of H-Phrases mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air. If breathing stops immediately apply mechanical ventilation, if necessary oxygen mask. Immediately call in physician.
Wash off with plenty of water. Dab with polyethylene glycol 400. Remove contaminated clothing. Immediately call in physician.
Rinse out with plenty of water for at least 10 minutes with the eyelid held wide open. lmmediately call an ophtalmologist.
Never give anything by mouth to an unconscious person. Make victim drink plenty of water. Avoid vomiting. Keep airways free.
Symptoms: In case of spontaneous vomiting, risk of aspiration. Pulmonary failure possible.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
ICP solvent
CAS: 64742-47-8
Multi Element (5E) Standard solution
---
ISE Internal Standard Gen.2
---
PremiSolv(TM) ICP Solvent
CAS: 64742-47-8
ECO-SOL MAX2, ESL4-CL2
---
Custom Solvents Standard
---
F-PCBs®,Internal standards for PCBs, individual compounds (<0.1%), in Isooctane II
CAS: 540-84-1
PCB 28 standard solution
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective clothing should be selected specificlly for the working place, depending on concentration and quantity of the hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier. See section 7.1
Required.
Required.
Required when vapours/aerosols are generated. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Required.
Do not allow to enter sewerage system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Hydrochloric acid - Nitric acid solution)
- Transport Class
- 8
- Packing Group
- III
no
no
no
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Multi Element ICP Standard sol. (22E)?
The signal word is danger.
What is the physical form of Multi Element ICP Standard sol. (22E)?
Multi Element ICP Standard sol. (22E) is a liquid with yellow color. It has odourless odor.
What is Multi Element ICP Standard sol. (22E) used for?
Reagent for analysis
What are the hazard statements for Multi Element ICP Standard sol. (22E)?
This substance has 4 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H315: Causes skin irritation.
- H335: May cause respiratory irritation.
What is the melting point of Multi Element ICP Standard sol. (22E)?
The melting point is -5C and the boiling point is 104C.