Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TOTAL SOURCE PAINT
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Professional use
Uses advised against
No uses advised against known
Manufacturers & Suppliers
TVH PARTS NV
distributor
BRABANTSTRAAT 15, B - 8790 WAREGEM
+32 56 43 48 11
Emergency Contacts
BIG
+32 14 58 45 45
24h/24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Symptoms: EXPOSURE TO HIGH CONCENTRATIONS: Dizziness. Narcosis. Irritation of the respiratory tract. Irritation of the nasal mucous membranes.
Wash immediately with lots of water. Soap may be used. Take victim to a doctor if irritation persists. Take victim to a doctor/medical service if irritation persists.
Symptoms: Tingling/irritation of the skin. ON CONTINUOUS/REPEATED EXPOSURE/CONTACT: Dry skin. Cracking of the skin.
Rinse with water. Take victim to an ophthalmologist if irritation persists.
Symptoms: Slight irritation. ON CONTINUOUS EXPOSURE/CONTACT: Irritation of the eye tissue.
Rinse mouth with water. Immediately after ingestion: give lots of water to drink. Do not induce vomiting. Consult a doctor/medical service if you feel unwell.
Symptoms: No effects known.
Immediate Medical Attention
Depending on the victim's condition: doctor/hospital.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Alcohol-resistant foam. BC powder. Carbon dioxide.
Solid water jet ineffective as extinguishing medium.
Upon combustion: CO and CO2 are formed.
Cool tanks/drums with water spray/remove them into safety.
Firefighter Protection
Gloves. Face-shield. Protective clothing. Heat/fire exposure: compressed air/oxygen apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop engines and no smoking. No naked flames or sparks. Spark- and explosionproof appliances and lighting equipment.
Contain released substance, pump into suitable containers. Plug the leak, cut off the supply. Dam up the liquid spill. Prevent soil and water pollution. Prevent spreading in sewers.
Take up liquid spill into inert absorbent material. Scoop absorbed substance into closing containers. Damaged/cooled tanks must be emptied. Carefully collect the spill/leftovers. Do not use compressed air for pumping over spills. Clean contaminated surfaces with an excess of water. Take collected spill to manufacturer/competent authority.
Materials: sand, earth, vermiculite
Related Products
Similar products with comparable safety profiles
SPRAY PAINT
---
TotalSource Acrylic fast dry high coverage coating spray
---
TotalSource Synthetic heavy-duty metallic coating
---
TEROSON PV 1185 A PAINT SHOP SEALANT
---
TEROSON PV 1030.3D W PAINT SHOP SEALANT
---
TEROSON PV 1095 PAINT SHOP SEALANT
---
AMPERE TRAFFIC PAINT
UFI: NQH5-S050-Q00Y-4SFW
AMPERE TRAFFIC PAINT
UFI: NQH5-S050-Q00Y-4SFW
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from naked flames/heat. Use earthed equipment. Use spark-/explosionproof appliances and lighting system. Keep away from ignition sources/sparks. Observe normal hygiene standards. Keep container tightly closed. Remove contaminated clothing immediately. Do not discharge the waste into the drain.
Provide for a tub to collect spills. Provide the tank with earthing. Keep out of direct sunlight. Keep only in the original container. Meet the legal requirements.
Observe normal hygiene standards. Remove contaminated clothing immediately.
Keep away from naked flames/heat. Keep away from ignition sources/sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Keep away from naked flames/heat. Use earthed equipment. Use spark-/explosionproof appliances and lighting system. Keep away from ignition sources/sparks. Measure the concentration in the air regularly. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.
Gloves.
Face shield.
Wear gas mask with filter type A if conc. in air > exposure limit.
Protective clothing.
See headings 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
May be ignited by sparks.
No data available.
Keep away from naked flames/heat. Use earthed equipment. Use spark-/explosionproof appliances and lighting system. Keep away from ignition sources/sparks.
Oxidizing agents, (strong) acids, (strong) bases.
Upon combustion: CO and CO₂ are formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Remove waste in accordance with local and/or national regulations. Hazardous waste shall not be mixed together with other waste. Different types of hazardous waste shall not be mixed together if this may entail a risk of pollution or create problems for the further management of the waste. Hazardous waste shall be managed responsibly. All entities that store, transport or handle hazardous waste shall take the necessary measures to prevent risks of pollution or damage to people or animals.
Dispose of at authorized waste collection point.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- Paint
- Transport Class
- 3
- Packing Group
- III
163, 223, 367, 955
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TOTAL SOURCE PAINT?
The signal word is warning.
What is the physical form of TOTAL SOURCE PAINT?
TOTAL SOURCE PAINT is a liquid with variable in colour, depending on the composition color. It has characteristic odour odor.
What is TOTAL SOURCE PAINT used for?
Professional use
What are the hazard statements for TOTAL SOURCE PAINT?
This substance has 3 hazard statements:
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of TOTAL SOURCE PAINT?
The melting point is No data available and the boiling point is No data available.