3M™ Finesse-It™ Polish - Final Finish

Remove person to fresh air. If you feel unwell, get medical attention.

Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention.

Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention.

Rinse mouth. If you feel unwell, get medical attention.

Use a carbon dioxide or dry chemical extinguisher to extinguish.

Closed containers exposed to heat from fire may build pressure and explode.

Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture.

Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.

For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water.

Avoid release to the environment.

Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person.

Materials: bentonite, vermiculite, or commercially available inorganic absorbent material, appropriate solvent

For industrial or professional use only. Do not use in a confined area with minimal air exchange. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.)

Store in a well-ventilated place. Keep container tightly closed. Keep from freezing. Store away from oxidizing agents.

Do not eat, drink or smoke when using this product. Wash thoroughly after handling.

Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment.

Gloves made from the following material(s) are recommended: Neoprene

Safety Glasses with side shields, Indirect Vented Goggles

In case of inadequate ventilation wear respiratory protection. An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates

Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment.

Stable.

This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.

Hazardous polymerization will not occur.

None known.

Strong oxidizing agents

Carbon monoxide, Carbon dioxide

scheduled waste has to be sent to a prescribed premise for recycling, treatment or disposal

Please approach Kualiti Alam for proper schedule waste classification and disposal.