NextSDS Logo
Safety Data Sheet EN

STARKE CRYSTAL CLEAR GLASS POLISH

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
STARKE CRYSTAL CLEAR GLASS POLISH
Chemical Name
Mixture
Synonyms
Crystal Clear Glass Polish

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Glass surface polish

Manufacturers & Suppliers

S

Starke Yacht Surface Technologies

distributor

17000 Alico Commerce Ct., Suite 101, Fort Myers, FL 33912

+1 (800) 203-5315

Emergency Contacts

John Watkins

+1 (239) 851-6030

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
WATER EC: 231-791-2 7732-18-5 --- No
CERIUM OXIDE EC: 215-150-4 1306-38-3 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air at once.

Symptoms: None expected.

Skin contact

If irritation occurs and product is on the skin, rinse thoroughly with lukewarm water, followed by a thorough washing of the affected area with soap and water. If irritation, redness or swelling persists, contact a physician immediately.

Symptoms: May be irritating to skin. The product can cause allergic skin reactions (e.g., rashes, welts, dermatitis) in some sensitive individuals. Symptoms of skin overexposure may include redness, itching, and irritation of affected areas.

Eye contact

flush with copious amounts of lukewarm water for at least 15 minutes. If irritation occurs, contact a physician.

Symptoms: Moderately irritating to the eyes. Symptoms of overexposure may include redness, itching, irritation and watering.

Ingestion

If ingested, do not induce vomiting. If product has been swallowed, drink plenty of water or milk IMMEDIATELY. If the patient is vomiting, continue to offer water or milk. Never give water or milk to an unconscious person. Provide an estimate of the time at which the material was ingested and the amount of the substance that was swallowed.

Symptoms: Nausea, intestinal discomfort, vomiting and/or diarrhea.

Immediate Medical Attention

Contact the nearest Poison Control Center or local emergency number. If eye irritation occurs, contact a physician. If skin irritation, redness or swelling persists, contact a physician immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide appropriate local exhaust ventilation on open containers. When using always keep the product moist. Use in an enclosed process area is recommended. Use in a well-ventilated area. Do not use in a confined area or areas with little or no air movement.

Hands

AVOID SKIN CONTACT . Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber. If necessary, refer to U.S. OSHA 29 CFR 1910.138, the appropriate standards of Canada, of the E.C. member states.

Eyes

AVOID EYE CONTACT . Wear safety glasses. If necessary, refer to U.S. OSHA 29 CFR 1910.133, Canadian standards, or the European Standard EN166.

Respiratory

Avoid breathing of vapors, mists or spray. No special respiratory protection is required under typical circumstances of use or handling. If necessary, use only respiratory protection authorized per U.S. OSHA's requirement in 29 CFR 1910.134, or applicable U.S. state regulations, or the appropriate standards of Canada, its provinces, E.C. member states, or Australia.

Skin/Body

No special body protection is required under typical circumstances of use and handling. If necessary, refer to appropriate standards of Canada, the E.C. member states, or U.S. OSHA.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor
---
Colour Intensity
---
Solubility In Fat
---
State Under Standard Conditions
---
Flammability
---
Ph
6-7.5
Auto Ignition Temperature
---
Metal Corrosion
---
Solidification Point
---
Physical State Data
liquid
Upper Explosive Limit
---
Softening Point
---
Appearance
Light tan liquid
Decomposition Temperature
---
Explosive Limits
---
Voc Content
0
Properties Status
---
Cloud Point
---
Partition Coefficient
---
Bulk Density
---
Freezing Point
---
Molecular Weight
---
Form
liquid
Flash Point
93.3 C (200 F)
Evaporation Rate
---
Vapor Density
---
Odor Threshold
---
Boiling Point
---
Physical State
Light tan liquid
Solubility In Water
---
Colour
Light tan
Kinematic Viscosity
145 mm [2] /s
Melting Point
---
Crystallisation Point
---
Vapor Pressure
ND
Solubility
Soluble
Relative Density
0.865 @ 25C
Density
---
Relative Evaporation Rate
---
Dynamic Viscosity
---
Lower Explosive Limit
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is STARKE CRYSTAL CLEAR GLASS POLISH known by?

STARKE CRYSTAL CLEAR GLASS POLISH is also known as: Crystal Clear Glass Polish

What is the hazard signal word for STARKE CRYSTAL CLEAR GLASS POLISH?

The signal word is no signal word.

What is the physical form of STARKE CRYSTAL CLEAR GLASS POLISH?

STARKE CRYSTAL CLEAR GLASS POLISH is a light tan liquid appearing as light tan liquid with light tan color.

What is the solubility of STARKE CRYSTAL CLEAR GLASS POLISH?

Soluble

What is STARKE CRYSTAL CLEAR GLASS POLISH used for?

Glass surface polish