Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Deep Crystal Polish A31
- Product Code
- A3116
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Automotive.
Manufacturers & Suppliers
Meguiars United Kingdom Limited
national supplier
3 Lamport Court, Heartlands, Daventry, Northants, NN11 8UF
+44 (0)870 241 6696
http://www.meguiars.co.uk
Emergency Contacts
Emergency Contact
+44 (0)870 241 6696
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Non-Hazardous Ingredients | --- | 60 - 90% | No |
| Hydrocarbons, C11-C14, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 926-141-6 | --- | 5 - 10% | Yes |
| Hydrocarbons, C11-C13, isoalkanes, <2% aromatics EC: 920-901-0 | --- | 1 - 5% | Yes |
| Titanium dioxide EC: 236-675-5 | 13463-67-7 | 0.3% | Yes |
| reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1) EC: 911-418-6 | 55965-84-9 | 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If you are concerned, get medical advice.
Wash with soap and water. If you are concerned, get medical advice.
Rinse mouth. If you feel unwell, get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use a carbon dioxide or dry chemical extinguisher to extinguish.
Water may not effectively extinguish fire.
Closed containers exposed to heat from fire may build pressure and explode.
Use water to keep fire-exposed containers and surfaces cool and prevent explosive rupture.
Firefighter Protection
Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice.
For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice.
Avoid release to the environment.
Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with detergent and water. Seal the container.
Related Products
Similar products with comparable safety profiles
STARKE CRYSTAL CLEAR GLASS POLISH
---
Metal Polish
---
Metal Polish
UFI: SJPV-J00T-A000-Q6FM
Polishing Slurry DPS-M88
---
283419 Crystal Rinse
UFI: Q6H9-J3UK-H30K-U5AJ
Polarshine E3 Glass Polishing Compound
---
Remint Polishing Compound H
---
4003093 Crystal Powder
UFI: K5GG-MKGR-J90U-NVK9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not use in a confined area with minimal air exchange. Keep out of reach of children. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. Avoid contact with oxidising agents (eg. chlorine, chromic acid etc.) Use personal protective equipment (eg. gloves, respirators...) as required.
Protect from sunlight. Store away from heat.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment.
No chemical protective gloves are required.
None required.
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for particulates. For questions about suitability for a specific application, consult with your respirator manufacturer. Use a respirator conforming to EN 140 or EN 136: filter type P
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section
Hazardous polymerisation will not occur.
Heat. Sparks and/or flames.
Strong acids. Strong bases. Strong oxidising agents.
None known. Refer to section 5.2 for hazardous decomposition products during combustion.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
12.3 : Bioaccumulative potential
12.3 : Bioaccumulative potential
12.3 : Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of the PBT and vPvB assessment
The material does not contain any substances that are assessed to be a PBT or vPvB.
12.6. Endocrine disrupting properties
The material does not contain any substances that are assessed to be an endocrine disruptor for environmental effects.
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes.
Dispose of contents/ container in accordance with the local/regional/national/international regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Deep Crystal Polish A31?
The signal word is no signal word.
What is the physical form of Deep Crystal Polish A31?
Deep Crystal Polish A31 is a liquid. with soft white color. It has sweet odor odor.
What is Deep Crystal Polish A31 used for?
Automotive.